The Digital Video Information Network - View Single Post

Ronn Kilby · June 5th, 2008, 08:27 AM

You just go to "output" and choose "send to HDV device" - Avid will create an m2t stream that it will save on your hard drive, then it will automatically start recording that stream on an attached (via firewire) HDV device. It must be attached to 1394 port on the computer, not the Mojo if you have one. Make sure the tape is cued because it will just start recording where it is. You can then send that stream to tape again by choosing "use existing stream."

June 5th, 2008, 08:27 AM	#5
Ronn Kilby Regular Crew Join Date: Apr 2007 Location: Valley Center, CA Posts: 168	No Adrenaline Required You just go to "output" and choose "send to HDV device" - Avid will create an m2t stream that it will save on your hard drive, then it will automatically start recording that stream on an attached (via firewire) HDV device. It must be attached to 1394 port on the computer, not the Mojo if you have one. Make sure the tape is cued because it will just start recording where it is. You can then send that stream to tape again by choosing "use existing stream."