|
Hi again...........
Ofer,
Will you do this little test for me?
Mount up your camera with the longest lens you have onto your VV 3.
Site up a target a good way off at full zoom in.
Lock the pan and tilt locks on the head - HARD!
Run video.
Grab the pan bar and try to make the head follow a circle, as if you were focussed onto the end of a spinning propellor.
Watch the video.
If the lens/ video actually DOES move in a circular pattern, then this is NOT a head issue.
It is a sticks issue.
The head and the attached camera and lenses can only move if there is flex in the support.
If there's flex in the support, nothing you do will eliminate the shakes/ wobbles untill you get a support which does not flex.
String, rubber bands and sealing wax may reduce the severity of your problems but are no substitute for a proper support system.
CS
|