Best render settings for PP CS3

Nick Stone · August 6th, 2008, 02:55 AM

I'm trying to get the most out of Premiere Pro CS3 in the render section.
Having only just got the program I was wondering if more experienced users could suggest the best setting for making, from the time line a MPEG 2 file.
Captured HDV from a Sony Z1
Project settings are HD
Render section.
VBP 2
MIN: 4Mbps
Tar: 4Mbps
Max: 8Mbps

Pal: Field order/None
Quality setting:4
This quality setting, what is this all about?

M Frames :3
N Frames: 12

Any advice would be welcomed

Nick

Harm Millaard · August 6th, 2008, 07:14 AM

Not much usable information to go on. But a few generic remarks may help you improve on that.

I assume you shot in PAL mode, correct?
I also assume you want MPEG2 for output to DVD, correct?
I don't know how long the duration of the sequence is and I haven't the faintest about the nature of your footage, whether it is rather static (interviews, a lot of stills, etc.) or whether it is high action sports.

Despite all the lacking information, here are a few things that caught my attention:

2-pass VBR suggests a duration of more than 1 hour, Min 4 and target 4Mbps suggests a duration of 2 hours or more. Field order should be lower field first.

Are you exporting elementary streams or muxed? What audio do you use, PCM or AC3?
Are you going to Encore with the MPEG for authoring? If yes, just export as DV AVI and import that into Encore as asset and let Encore do the transcoding.

Otherwise I suggest you start reading about encode settings. It is a very complicated matter and can not easily be explained. Encoding is more an art.

Nick Stone · August 6th, 2008, 02:47 PM

Thanks Harm,
Seems to be a lack of info to render MPEG 2 from the timeline.
I dont want to encode to Encore at this stage as i use another program for DVD encoding.

Nick

Graham Hickling · August 6th, 2008, 10:59 PM

To get the 'most' quality you'll generally want to maximize your bitrate, so your target should be closer to 8Mbps than 4 which you have currently. The tradeoff, as Harm implies, is that your mpeg file may then end up too big to be burned on disk, if your footage is lengthy (more than an hour).

The quality slider is generally a tradeoff between .. um ... quality and time taken to render.

You'll also need to decide if you prefer an interlaced or progressive DVD - but that depends on the material (action or not) and your own preferences...

Steven Gotz · August 7th, 2008, 10:12 AM

As I understand it, the quality setting deals with how much time is dedicated to encoding any fast motion.

Tripp Woelfel · August 7th, 2008, 06:53 PM

Aside from the cost in CPU cycles, why would anyone want to leave the Quality slider anywhere other than all the way up?

August 6th, 2008, 02:55 AM	#1
Nick Stone Regular Crew Join Date: May 2008 Location: Australia Posts: 74	Best render settings for PP CS3 I'm trying to get the most out of Premiere Pro CS3 in the render section. Having only just got the program I was wondering if more experienced users could suggest the best setting for making, from the time line a MPEG 2 file. Captured HDV from a Sony Z1 Project settings are HD Render section. VBP 2 MIN: 4Mbps Tar: 4Mbps Max: 8Mbps Pal: Field order/None Quality setting:4 This quality setting, what is this all about? M Frames :3 N Frames: 12 Any advice would be welcomed Nick

August 7th, 2008, 10:12 AM	#5
Steven Gotz Trustee Join Date: Jun 2002 Location: Clermont, FL Posts: 1,520	As I understand it, the quality setting deals with how much time is dedicated to encoding any fast motion. __________________ Steven Gotz http://www.stevengotz.com

August 7th, 2008, 06:53 PM	#6
Tripp Woelfel Major Player Join Date: Jan 2008 Location: North Conway, NH Posts: 630	Aside from the cost in CPU cycles, why would anyone want to leave the Quality slider anywhere other than all the way up? __________________ Tripp Woelfel

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

August 6th, 2008, 07:14 AM	#2
Harm Millaard Major Player Join Date: Aug 2006 Location: Rotterdam, Netherlands Posts: 590	Not much usable information to go on. But a few generic remarks may help you improve on that. I assume you shot in PAL mode, correct? I also assume you want MPEG2 for output to DVD, correct? I don't know how long the duration of the sequence is and I haven't the faintest about the nature of your footage, whether it is rather static (interviews, a lot of stills, etc.) or whether it is high action sports. Despite all the lacking information, here are a few things that caught my attention: 2-pass VBR suggests a duration of more than 1 hour, Min 4 and target 4Mbps suggests a duration of 2 hours or more. Field order should be lower field first. Are you exporting elementary streams or muxed? What audio do you use, PCM or AC3? Are you going to Encore with the MPEG for authoring? If yes, just export as DV AVI and import that into Encore as asset and let Encore do the transcoding. Otherwise I suggest you start reading about encode settings. It is a very complicated matter and can not easily be explained. Encoding is more an art.

August 6th, 2008, 02:47 PM	#3
Nick Stone Regular Crew Join Date: May 2008 Location: Australia Posts: 74	Thanks Harm, Seems to be a lack of info to render MPEG 2 from the timeline. I dont want to encode to Encore at this stage as i use another program for DVD encoding. Nick

August 6th, 2008, 10:59 PM	#4
Graham Hickling Trustee Join Date: May 2004 Location: Knoxville, Tennessee Posts: 1,086	To get the 'most' quality you'll generally want to maximize your bitrate, so your target should be closer to 8Mbps than 4 which you have currently. The tradeoff, as Harm implies, is that your mpeg file may then end up too big to be burned on disk, if your footage is lengthy (more than an hour). The quality slider is generally a tradeoff between .. um ... quality and time taken to render. You'll also need to decide if you prefer an interlaced or progressive DVD - but that depends on the material (action or not) and your own preferences...