Optura XI Power Board

Brandt Wilson · January 19th, 2008, 12:12 AM

Hi all,

I've discovered just what happens when someone mistakens power supplies and provides too much voltage to the ac port on the XI. Dead camera.

Does anyone know of a resource that sells the boards for these for a reasonable price, or does anyone have a broken XI that they would be interested in selling the main board out of? I'd prefer to not call it a paperweight just yet.

I've heard that on these camcorders that you (meaning a technician) can replace the microfuses rather than the entire power board. Has anyone had experience with.

Thanks,
Brandt

Don Palomaki · January 19th, 2008, 01:43 PM

Working on the internals is not for folks without the necessary technical skills and tools. With the right tools, parts, and skill the fuse(s) could be replaced if that is the only issue. At one time you could buy service manuals from Canon, costs were in the $50 range. I've heard they no longer will sell them to end users.

Sometimes gear may show up on E-bay, and other recycling sites. Try a search.

Brandt Wilson · January 30th, 2008, 10:53 AM

Yeah, this isn't a repair I'd try on my own. I have a number of Canon repair facilities nearby, and their estimates are all over the board, based on widely varying quotes from Canon on the price of the part. Before I commit the camera to one of them, I want to either have the part in hand, or have a solid quote on it.

My understanding from a Canon field engineer was that Canon specifically set up their pricing structure so that a full rebuild of a camcorder would not exceed the retail price of it. He used the example of dropping an XL1 into a saltwater bay. So, hearing that the power board would be $600 wasn't consistent with what I'd previously heard.

Thanks,
Brandt

January 19th, 2008, 12:12 AM	#1
Brandt Wilson Major Player Join Date: Jan 2003 Location: Portland, OR Posts: 208	Optura XI Power Board Hi all, I've discovered just what happens when someone mistakens power supplies and provides too much voltage to the ac port on the XI. Dead camera. Does anyone know of a resource that sells the boards for these for a reasonable price, or does anyone have a broken XI that they would be interested in selling the main board out of? I'd prefer to not call it a paperweight just yet. I've heard that on these camcorders that you (meaning a technician) can replace the microfuses rather than the entire power board. Has anyone had experience with. Thanks, Brandt Last edited by Brandt Wilson; January 19th, 2008 at 11:30 AM.

January 19th, 2008, 01:43 PM	#2
Don Palomaki Wrangler Join Date: Sep 2001 Location: Northern VA Posts: 3,137	Working on the internals is not for folks without the necessary technical skills and tools. With the right tools, parts, and skill the fuse(s) could be replaced if that is the only issue. At one time you could buy service manuals from Canon, costs were in the $50 range. I've heard they no longer will sell them to end users. Sometimes gear may show up on E-bay, and other recycling sites. Try a search. __________________ dpalomaki@cox.net

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 30th, 2008, 10:53 AM	#3
Brandt Wilson Major Player Join Date: Jan 2003 Location: Portland, OR Posts: 208	Yeah, this isn't a repair I'd try on my own. I have a number of Canon repair facilities nearby, and their estimates are all over the board, based on widely varying quotes from Canon on the price of the part. Before I commit the camera to one of them, I want to either have the part in hand, or have a solid quote on it. My understanding from a Canon field engineer was that Canon specifically set up their pricing structure so that a full rebuild of a camcorder would not exceed the retail price of it. He used the example of dropping an XL1 into a saltwater bay. So, hearing that the power board would be $600 wasn't consistent with what I'd previously heard. Thanks, Brandt