yet one more question about AGC, sorry!

Richard Wakefield · August 10th, 2008, 05:30 AM

ok, we've all established that AGC really does have to be OFF to eiliminate alot of grain, BUT my question is:

when you have AGC OFF, you don't get the prompt for the ND filter (like you do when you have AGC ON), gutted!!

so is it a rule to turn AGC back to ON when it's bright outside to get those prompts? or is there another way round this?

cheers

Bill Grant · August 10th, 2008, 09:37 AM

Richard,
This is my OPINION so take it as that. Always shoot in manual where exposure is concerned. The only time I would put a camera in auto would be if it is unmanned, and you suspect the light to change. Especially with a camera like this, the real power is in using the functions manually. I haven't given AGC one single thought since I've had this camera mainly becuase I don't want to trust the camera on gain, that goes with any camera, the auto gain is dangerous.
Bill

Trish Kerr · August 10th, 2008, 10:29 AM

I'm pretty sure I still get ND warnings with the autogain turned OFF. Now I'll have to check.

But regardless, you can use the exposure meter to determine if you need the ND on and at what setting - you just have to remember to turn it off after you don't need it or you'll be wondering what the hell - I've done that before

Trish

Bill Pryor · August 10th, 2008, 11:01 AM

Yes, there is the ND warning. Or, you can just check your exposure. If it's too hot, you need the ND.

Richard Wakefield · August 10th, 2008, 01:44 PM

thanks guys, i need to look into checking the exposure reading...because i film weddings, i've often taken the lazy route of using Auto but the more i use these great camcorders, the more i now feel i should understand them fully...

August 10th, 2008, 05:30 AM	#1
Richard Wakefield Major Player Join Date: Feb 2006 Location: Surrey, UK Posts: 403	yet one more question about AGC, sorry! ok, we've all established that AGC really does have to be OFF to eiliminate alot of grain, BUT my question is: when you have AGC OFF, you don't get the prompt for the ND filter (like you do when you have AGC ON), gutted!! so is it a rule to turn AGC back to ON when it's bright outside to get those prompts? or is there another way round this? cheers

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

August 10th, 2008, 09:37 AM	#2
Bill Grant Major Player Join Date: May 2005 Location: Columbia,SC Posts: 333	Richard, This is my OPINION so take it as that. Always shoot in manual where exposure is concerned. The only time I would put a camera in auto would be if it is unmanned, and you suspect the light to change. Especially with a camera like this, the real power is in using the functions manually. I haven't given AGC one single thought since I've had this camera mainly becuase I don't want to trust the camera on gain, that goes with any camera, the auto gain is dangerous. Bill

August 10th, 2008, 10:29 AM	#3
Trish Kerr Major Player Join Date: Mar 2007 Location: Canada Posts: 285	I'm pretty sure I still get ND warnings with the autogain turned OFF. Now I'll have to check. But regardless, you can use the exposure meter to determine if you need the ND on and at what setting - you just have to remember to turn it off after you don't need it or you'll be wondering what the hell - I've done that before Trish

August 10th, 2008, 11:01 AM	#4
Bill Pryor Contributor Join Date: Jan 2003 Location: Kansas City, MO Posts: 3,245	Yes, there is the ND warning. Or, you can just check your exposure. If it's too hot, you need the ND.

August 10th, 2008, 01:44 PM	#5
Richard Wakefield Major Player Join Date: Feb 2006 Location: Surrey, UK Posts: 403	thanks guys, i need to look into checking the exposure reading...because i film weddings, i've often taken the lazy route of using Auto but the more i use these great camcorders, the more i now feel i should understand them fully...