HV20 24p in Final Cut Pro 6.03

Dave Daniels · July 1st, 2008, 11:11 AM

I know there is info. on this all over the place, but I am still baffled by Compressor and Apple's "lack of info. I have followed this document to a "T" (http://docs.info.apple.com/article.html?artnum=306389) and every time it spits out a 4x3 image. Now I have tried 2 different settings including "custom 16x9" and changing the pixel size and not changing anything!! No matter what 4x3. So my question is why am I reading that folks are having great success with this tutorial and I'm the kid crying in the corner cause I got picked last to play in the game...

What am I overlooking?!?

Dave

Ryan Mueller · July 1st, 2008, 09:00 PM

Hey Dave,

I was right there with you, no matter what I could not get compressor to remove the pulldown correctly. I finally said "to hell with it" and downloaded JES DeInterlacer and voila! No problems since.

Dave Daniels · July 2nd, 2008, 07:51 AM

Quote:

Originally Posted by Ryan Mueller

Hey Dave,

I was right there with you, no matter what I could not get compressor to remove the pulldown correctly. I finally said "to hell with it" and downloaded JES DeInterlacer and voila! No problems since.

That's what I had to do as well... but again how is it that every one else loves it but you and me have issues?!?! I need counseling!!

Bill Doyle · July 4th, 2008, 09:09 AM

Guys,

You can add me to the JES list. I do have a workflow question, however (I'm using FCP 6.0.3). I have already captured the footage and now need to batch convert from the browser, first using JES and then converting to ProRes. Could you walk me through the batch convert steps? (I have about 100 clips, neatly divided into subfolders and would like to keep things as orderly as possible. Also:

1. Is there a way to re-name the clips or make some change to the name during the batch process so that I can easily identify them?

2. Anything special I need to do to the JES settings beforehand?

Thanks,

Bill Doyle

Victor Lee · July 26th, 2008, 06:25 PM

I got a 4x3 image as well after the 24p footage ran through compressor. BUT, I import the 4x3 footage anyways and it was fine. FCP recognizes it as 16:9 24p footage. Did my editing, export it and everything looked fine.

Brian Boyko · August 4th, 2008, 01:09 AM

I think I may have the solution to some of your problems.

Technically, anything recorded to the Canon HV*0 is recorded at 1440x1080, with a pixel aspect ratio of 1.333.

If your playback software ignores the aspect ratio for some reason, it will interpret it as a "square pixel" image, which happens to be 4:3.

You have not lost any picture quality information if this happens, it's just a misinterpretation of the aspect ratio. You can always set the aspect ratio to 1.333 manually.

Taking it into FCP should recognize that 1.333 aspect ratio, of course, and I always try to export as "square pixels."

July 1st, 2008, 11:11 AM	#1
Dave Daniels New Boot Join Date: Nov 2006 Location: Virginia Beach VA. Posts: 20	HV20 24p in Final Cut Pro 6.03 I know there is info. on this all over the place, but I am still baffled by Compressor and Apple's "lack of info. I have followed this document to a "T" (http://docs.info.apple.com/article.html?artnum=306389) and every time it spits out a 4x3 image. Now I have tried 2 different settings including "custom 16x9" and changing the pixel size and not changing anything!! No matter what 4x3. So my question is why am I reading that folks are having great success with this tutorial and I'm the kid crying in the corner cause I got picked last to play in the game... What am I overlooking?!? Dave

August 4th, 2008, 01:09 AM	#6
Brian Boyko Major Player Join Date: Dec 2006 Location: Austin, TX Posts: 380	I think I may have the solution to some of your problems. Technically, anything recorded to the Canon HV*0 is recorded at 1440x1080, with a pixel aspect ratio of 1.333. If your playback software ignores the aspect ratio for some reason, it will interpret it as a "square pixel" image, which happens to be 4:3. You have not lost any picture quality information if this happens, it's just a misinterpretation of the aspect ratio. You can always set the aspect ratio to 1.333 manually. Taking it into FCP should recognize that 1.333 aspect ratio, of course, and I always try to export as "square pixels." __________________ I'm an amateur, and I make no claims to be anything but. Equip: 2 HV20s, VideoMic, Sennh. EW/GW100, Zoom H2, FCP (Saving up for XH-A1)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

July 1st, 2008, 09:00 PM	#2
Ryan Mueller Regular Crew Join Date: Mar 2007 Location: Highlands Ranch, CO Posts: 185	Hey Dave, I was right there with you, no matter what I could not get compressor to remove the pulldown correctly. I finally said "to hell with it" and downloaded JES DeInterlacer and voila! No problems since.

July 4th, 2008, 09:09 AM	#4
Bill Doyle Regular Crew Join Date: Sep 2006 Location: Worcester, MA Posts: 40	Guys, You can add me to the JES list. I do have a workflow question, however (I'm using FCP 6.0.3). I have already captured the footage and now need to batch convert from the browser, first using JES and then converting to ProRes. Could you walk me through the batch convert steps? (I have about 100 clips, neatly divided into subfolders and would like to keep things as orderly as possible. Also: 1. Is there a way to re-name the clips or make some change to the name during the batch process so that I can easily identify them? 2. Anything special I need to do to the JES settings beforehand? Thanks, Bill Doyle

July 26th, 2008, 06:25 PM	#5
Victor Lee Tourist Join Date: Jul 2008 Location: San Francisco Posts: 3	I got a 4x3 image as well after the 24p footage ran through compressor. BUT, I import the 4x3 footage anyways and it was fine. FCP recognizes it as 16:9 24p footage. Did my editing, export it and everything looked fine.