Aperature automatically changes in Manual Mode at DVinfo.net

Kelly Wilbur · June 11th, 2005, 08:09 PM

Well, I finally got an XL2 20x and I've been playing with it and going through the manual all day. I can tell you that everything I read on this BBS definitely seems clearer now that I actually own the camera.

One quick question. I've been shooting in Manual 24p, 1/48 and I've noticed that my Iris level changes depending on the brightness of the subject. According to page 60 in the manual, I should be able to set this as low as F1.6. However, sometimes it won't go that low and sometimes I set it low and it goes back up on its own when I the lighting increases.

Since the camera is in manual mode, how is this happening? I assume I am missing some setting in the camera, but I can't find it in the manual.

Thanks,

Kelly

Patrick King · June 11th, 2005, 08:12 PM

Kelly,

The minimum aperture setting is dependant on the zoom position also as I understand it. Zoom all the way out and you should be able to achieve F1.6.

Boyd Ostroff · June 11th, 2005, 08:14 PM

Just a guess... are you zooming in and out? If so, then that would explain the iris change. Like just about all camcorders, the XL-2 has different maximum iris openings at the wide and telephoto ends of the zoom.

See this post for a technical explanation:

http://www.dvinfo.net/conf/showpost....28&postcount=8

Kelly Wilbur · June 11th, 2005, 08:17 PM

I went to go try some things out and found it that it was the zoom. I came back to post and you guys had the answers here.

Isn't the internet great? You can have an obscure question about just about anything and the answer comes within seconds.

Thanks guys!

Kelly

June 11th, 2005, 08:09 PM	#1
Kelly Wilbur Regular Crew Join Date: May 2005 Location: Indianapolis Indiana Posts: 109	Aperature automatically changes in Manual Mode Well, I finally got an XL2 20x and I've been playing with it and going through the manual all day. I can tell you that everything I read on this BBS definitely seems clearer now that I actually own the camera. One quick question. I've been shooting in Manual 24p, 1/48 and I've noticed that my Iris level changes depending on the brightness of the subject. According to page 60 in the manual, I should be able to set this as low as F1.6. However, sometimes it won't go that low and sometimes I set it low and it goes back up on its own when I the lighting increases. Since the camera is in manual mode, how is this happening? I assume I am missing some setting in the camera, but I can't find it in the manual. Thanks, Kelly

June 11th, 2005, 08:12 PM	#2
Patrick King Major Player Join Date: Jul 2004 Location: Enterprise, AL Posts: 857	Kelly, The minimum aperture setting is dependant on the zoom position also as I understand it. Zoom all the way out and you should be able to achieve F1.6. __________________ Fear No Weevil!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

June 11th, 2005, 08:14 PM	#3
Boyd Ostroff Wrangler Join Date: Dec 2002 Location: Mays Landing, NJ Posts: 11,787	Just a guess... are you zooming in and out? If so, then that would explain the iris change. Like just about all camcorders, the XL-2 has different maximum iris openings at the wide and telephoto ends of the zoom. See this post for a technical explanation: http://www.dvinfo.net/conf/showpost....28&postcount=8

June 11th, 2005, 08:17 PM	#4
Kelly Wilbur Regular Crew Join Date: May 2005 Location: Indianapolis Indiana Posts: 109	I went to go try some things out and found it that it was the zoom. I came back to post and you guys had the answers here. Isn't the internet great? You can have an obscure question about just about anything and the answer comes within seconds. Thanks guys! Kelly