attaching camera to cymbal stand

Robert Bobson · May 22nd, 2006, 11:32 AM

I found an old cymbal stand that I can attach to the bike frame.

Now I'm trying to figure out how to attach a small camera (using the single screw in the bottom) to the threaded upright of the cymbal stand.
any ideas on how to bridge this gap?

I could mount a small platform on the stand upright, but I'm afraid it would rotate around the single point.

thanks for any help you can provide.

Bob

Greg Boston · May 22nd, 2006, 12:08 PM

I would suggest using a monopod. It will attach directly to a camera, can be extended or retracted as necesary, and can be mounted to the bike frame with clamps or whatever. As for the cymbal stand, you would have to use an adapter of some type. Do you know what size threads are standard on cymbal stands? The camera needs a 3/8 threaded stud for mounting.

-gb-

Paul Jefferies · June 15th, 2006, 05:30 PM

I would go for a magic arm with clamp and tripod plate adaptor (usually this comes as a kit) made by Bogen/Manfrotto. You will be able to clamp this directly to the bike frame and set up for any camera position you like - although its around $100 its a piece of kit I would never leave home without

May 22nd, 2006, 11:32 AM	#1
Robert Bobson Major Player Join Date: Feb 2003 Location: Bay City, Michigan Posts: 259	attaching camera to cymbal stand I found an old cymbal stand that I can attach to the bike frame. Now I'm trying to figure out how to attach a small camera (using the single screw in the bottom) to the threaded upright of the cymbal stand. any ideas on how to bridge this gap? I could mount a small platform on the stand upright, but I'm afraid it would rotate around the single point. thanks for any help you can provide. Bob

May 22nd, 2006, 12:08 PM	#2
Greg Boston Wrangler Join Date: Oct 2003 Location: The Colony, TX Posts: 5,588 Images: 1	I would suggest using a monopod. It will attach directly to a camera, can be extended or retracted as necesary, and can be mounted to the bike frame with clamps or whatever. As for the cymbal stand, you would have to use an adapter of some type. Do you know what size threads are standard on cymbal stands? The camera needs a 3/8 threaded stud for mounting. -gb- __________________ Greg Boston Sony PDW-F350, Panasonic PV-DV953, FCP Studio

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 15th, 2006, 05:30 PM	#3
Paul Jefferies Major Player Join Date: Nov 2005 Location: Croydon, England Posts: 277	I would go for a magic arm with clamp and tripod plate adaptor (usually this comes as a kit) made by Bogen/Manfrotto. You will be able to clamp this directly to the bike frame and set up for any camera position you like - although its around $100 its a piece of kit I would never leave home without