Quote:
Originally Posted by Robert Bale
OK, I have the same problem, But using FCP, So can any FCP users shed some light.
|
It has taken some time because my goal is to deliver Blu-ray as well SD DVD with footage from my EX3. I just finished a 43 minute project that accomplishes this with very good SD results (sharp with clean edges) and amazing Blu-ray results. I used the attached workflow for EX3 1920x1080/60i (detail off), FCP 6.0.5 with an HD and SD timeline in the same project, then:
HD - Blu-ray via Encore CS4 4.01 (Export a FCP self-contained movie, set Encore project to 35Mb/s and PCM audio)
SD - DVD via Compressor 3.05 and DVDSP 4.2.1 (Export FCP reference with current settings, set DVDSP per)