DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   All Things Audio (https://www.dvinfo.net/forum/all-things-audio/)
-   -   Sound levels issue in camera (https://www.dvinfo.net/forum/all-things-audio/106047-sound-levels-issue-camera.html)

Michael Foo October 19th, 2007 08:12 PM

Sound levels issue in camera
 
Hi all,

Let's see if I can properly explain this. I'm using a Canon XH-A1 with a SD-302 mixer. I have a wireless receiver plugged into input 1 (mic level, DYN), then coming out of the mixer to the camera (ch 1). I then send tone to the camera and adjust the camera levels to -20db. During recording I watch the mixer levels and ensure they are normal. The resulting audio on the camera is completely blown out (too high), even though the levels never go above -20 on the camera or the mixer. The levels on the camera also seem to be locked absolutely at -20 (bars never go above). Not sure what's going on. Any ideas are greatly appreciated.

Michael

ps. should also mention that I've recorded audio on the the other output to a flash recorder and it came out fine.

Ty Ford October 19th, 2007 08:56 PM

I'm guessing you're setting the 302 to line level and the camera is set to mic level input.

You can actually throw line level tone to a mic input and set level. If you listen in the headset, you can hear the distortion hair around the tone compared to when you set the camera to line level input and hear normal sounding (no hair) tone.

Welcome to the wonderful world of pro audio. :)

Regards,

Ty Ford

Gerry Gallegos October 19th, 2007 09:24 PM

distortion
 
Do you have the output of the wireless receiver set up to out put line and the input of the mixer set up to receive Mic? that is what it sounds like its the problem . the distortion is happening between the receiver and the mixer rather than the mixer and cam, which explains distortion with meters showing a normal level. "gain staging" thats the key, research it, it is way too complicated to go into here. but it is critical, not to mention that when you master it you get the quietest silence you can achieve out of your gear.

Michael Foo October 19th, 2007 11:32 PM

Ty/Gerry, thank you for your replies. You were absolutely correct. I feel pretty dumb now. The output jacks on the SD-302 are configured as Line by default. I set the XLRs on the camera to match the signal input. Problem solved.

Thanks again.

Ty Ford October 20th, 2007 05:10 AM

Michael,

Hey! At least you figured it out before you got out there and recorded without listening and botched the job.

You win big time in my book because you listened, learned, got it and moved on!

You'd be amazed at the number of people I hear from who blow a whole shoot because they didn't listen during shooting.

Regards,

Ty Ford


All times are GMT -6. The time now is 05:47 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network