Sennheiser SK100 wont power on....
 

I got a SK100 body pack transmitter that wont turn on, i have tried many different battery's and have ruled that out, besides that any other ideas why it wont turn on?

It worked fine about 1 month ago and has been in my pelican case ever since, stored with batteries removed.

Dear Max,

If this is a Generation 1 model, there is a chance that it is powered on, but the display is blank.

Try a fresh battery, then see if your receiver picks up a signal. If you have not changed the frequencies, then it may just work.

Thanks for the suggestion, but unfortunately still nothing, no display or led lights come on. The batteries are good if i stick them in another device.

Dear Max,

Is yours a "G2"?

It is a "G2" if it uses AA batteries.

It is a "G1" if it uses a 9 Volt battery.

With the "G2", you have an indication, other than the LCD, that the unit is powered on.

If I remember correctly, with the "G1" there is no indication that the unit is powered on, other than the LCD.

its the g2 I have.