How Do I sync EX1 to protools DIGI002 at DVinfo.net

Artkran Temritikulchai · April 19th, 2009, 10:15 AM

How Do I sync EX1 to protools DIGI002?

Clapper is sure good but time consuming. How do I use analogue timecode for this?

Rick Reineke · April 19th, 2009, 05:41 PM

I don't know about the PT DIGI002, but if LTC was also recorded on an audio track, many Avid NLEs can transpose it, and place it in the timeline with the ability to render a BWF or OMF. Don't know about FCP. I think I read the FCP-6 can do this also. Then, you may also need the PT $1200 digital translator to read TC or open an OMF... again, I'm not familiar with DIGI002 so this may not be the case.
Your other option is wild syncing with the camera mic or reference audio track... if it was recorded.

Steve House · April 20th, 2009, 04:20 AM

Even timecode workflows will slate every take.

Dale Baglo · April 26th, 2009, 11:05 PM

I don't have an EX1, so I don't know what it likes to receive for sync. But when I've needed to slave stuff (like MIDI sequencers) to Pro Tools via the 002... I just import a pre-recorded region of SMPTE (so Pro Tools is the master) and feed that signal out to whatever I want to have chase it (in my case, that's usually a Midi Time Piece).

April 19th, 2009, 10:15 AM	#1
Artkran Temritikulchai New Boot Join Date: Mar 2009 Location: Thai Posts: 5	How Do I sync EX1 to protools DIGI002 How Do I sync EX1 to protools DIGI002? Clapper is sure good but time consuming. How do I use analogue timecode for this?

April 20th, 2009, 04:20 AM	#3
Steve House Inner Circle Join Date: Mar 2005 Location: Hamilton, Ontario, Canada Posts: 5,742	Even timecode workflows will slate every take. __________________ Good news, Cousins! This week's chocolate ration is 15 grams!

April 26th, 2009, 11:05 PM	#4
Dale Baglo Regular Crew Join Date: May 2006 Location: Victoria, BC Posts: 64	I don't have an EX1, so I don't know what it likes to receive for sync. But when I've needed to slave stuff (like MIDI sequencers) to Pro Tools via the 002... I just import a pre-recorded region of SMPTE (so Pro Tools is the master) and feed that signal out to whatever I want to have chase it (in my case, that's usually a Midi Time Piece). __________________ Need a narration? www.dalebaglo.com

April 19th, 2009, 05:41 PM	#2
Rick Reineke Inner Circle Join Date: Aug 2008 Location: New York Posts: 2,038	I don't know about the PT DIGI002, but if LTC was also recorded on an audio track, many Avid NLEs can transpose it, and place it in the timeline with the ability to render a BWF or OMF. Don't know about FCP. I think I read the FCP-6 can do this also. Then, you may also need the PT $1200 digital translator to read TC or open an OMF... again, I'm not familiar with DIGI002 so this may not be the case. Your other option is wild syncing with the camera mic or reference audio track... if it was recorded.