AT 4025 and 8022 are pin-3 hot at DVinfo.net

Ty Ford · July 28th, 2009, 02:28 PM

Hi,

I'm just hearing that SOME of the new AT 4025 and 8022 stereo mics sneaked out pin 3 high instead of pin 2 high. This won't be a problem if you using either of them alone by may cause phasing issues if combined with mics that are pin 2 high.

AT is checking to find the problem serial number series.

Regards,

Ty Ford

Allan Black · July 28th, 2009, 02:44 PM

Trouble at the plant, thanks for the heads up Ty.

What to do?, the dealers would probably reverse any miscreants or you could reverse the pins in a custom marked cable. Can't imagine there'd be a recall.

Cheers.

Ty Ford · July 29th, 2009, 04:18 AM

.: SERVICE BULLETIN :.

BP4025 & AT8022 Stereo Microphones

A Service Bulletin has been issued on the Audio-Technica BP4025 and AT8022 Stereo Microphones.

Due to a production wiring error, the output of both channels of some of these microphones is out of phase with industry convention. The microphones exhibit no problems when used individually; their problems occur when used together with other microphones.

Audio-Technica will repair affected microphones at our expense.

Please contact the Audio-Technica service department at (330) 686-2600 or repair@atus.com for instructions on how to return your BP4025 and AT8022 microphone(s) for repair.

Identifying Affected Microphones
BP4025
This Service Bulletin applies only to BP4025 microphones identified with any of the following date codes: 0844, 0850, 0851, 0852, 0904, 0907

The BP4025 date codes are located on a sticker attached to the XLR connector at the bottom of each microphone. Note: If your BP4025 microphone’s date code is marked with a green dot, or is a different number from the numbers listed above, it does not require service.

AT8022
This Service Bulletin applies only to AT8022 microphones identified with any of the following date codes: 0840, 0843, 0848, 0904, 0909, 0921

The AT8022 date codes are located on a sticker inside the microphone’s battery compartment. Note: If your AT8022 microphone’s date code is marked with a green dot, or is a different number from the numbers listed above, it does not require service.

Please know that we profoundly regret this error and are very sorry for any inconvenience to you.

This Service Bulletin was posted on July 28, 2009.

July 28th, 2009, 02:28 PM	#1
Ty Ford Inner Circle Join Date: Nov 2004 Location: Baltimore, MD USA Posts: 2,337	AT 4025 and 8022 are pin-3 hot Hi, I'm just hearing that SOME of the new AT 4025 and 8022 stereo mics sneaked out pin 3 high instead of pin 2 high. This won't be a problem if you using either of them alone by may cause phasing issues if combined with mics that are pin 2 high. AT is checking to find the problem serial number series. Regards, Ty Ford __________________ Ty Ford's Audio Bootcamp Field Guide Ty Ford's Audio Video Blog

July 28th, 2009, 02:44 PM	#2
Allan Black Inner Circle Join Date: Sep 2006 Location: Sydney. Posts: 2,887	Trouble at the plant, thanks for the heads up Ty. What to do?, the dealers would probably reverse any miscreants or you could reverse the pins in a custom marked cable. Can't imagine there'd be a recall. Cheers. __________________ Drink more tap water. On admission at Sydney hospitals more than 5% of day patients are de-hydrated.

July 29th, 2009, 04:18 AM	#3
Ty Ford Inner Circle Join Date: Nov 2004 Location: Baltimore, MD USA Posts: 2,337	.: SERVICE BULLETIN :. BP4025 & AT8022 Stereo Microphones A Service Bulletin has been issued on the Audio-Technica BP4025 and AT8022 Stereo Microphones. Due to a production wiring error, the output of both channels of some of these microphones is out of phase with industry convention. The microphones exhibit no problems when used individually; their problems occur when used together with other microphones. Audio-Technica will repair affected microphones at our expense. Please contact the Audio-Technica service department at (330) 686-2600 or repair@atus.com for instructions on how to return your BP4025 and AT8022 microphone(s) for repair. Identifying Affected Microphones BP4025 This Service Bulletin applies only to BP4025 microphones identified with any of the following date codes: 0844, 0850, 0851, 0852, 0904, 0907 The BP4025 date codes are located on a sticker attached to the XLR connector at the bottom of each microphone. Note: If your BP4025 microphone’s date code is marked with a green dot, or is a different number from the numbers listed above, it does not require service. AT8022 This Service Bulletin applies only to AT8022 microphones identified with any of the following date codes: 0840, 0843, 0848, 0904, 0909, 0921 The AT8022 date codes are located on a sticker inside the microphone’s battery compartment. Note: If your AT8022 microphone’s date code is marked with a green dot, or is a different number from the numbers listed above, it does not require service. Please know that we profoundly regret this error and are very sorry for any inconvenience to you. This Service Bulletin was posted on July 28, 2009. __________________ Ty Ford's Audio Bootcamp Field Guide Ty Ford's Audio Video Blog