rode video mic
 

any opinions on the rode video mic? I just wanted some solid opinions or alternate mic solutions before i buy. iam using a 950 and am looking for a mic for a documentary with audio coming primarily from ambiance but also some dialogue from 3-4 feet away.
cheers
jeff

http://www.vasst.com/search.aspx?text=Rode has a review. Search this forum, you'll find a lot of comments on this particular mic

Look at this thread for some info
http://www.dvinfo.net/conf/showthread.php?t=48093

Look at this review for more information:
http://www.pana3ccduser.com/article....%D8DE-Videomic

I used one in my Audio Bootcamp here saturday and it did very well for its price. The Video Mic smoked the sennheiser MKE 300 but was no match for the 416.

Rode has also come to market with a lot of accessories, long cord, mini TRS to XLR, pole and shoe suspension mounts. A camera mount that has a dummy pipe that fits in some of the camera mounted mic holders and holds the VideoMic. Oh and a dead cat for high wind situations. I can see this going into schools in a heartbeat.

An interesting note: When I rigged up the VideoMic as a boom mic, long extension and XLR converter, I plugged it into my Sound Devices 442 mixer. Something sounded NOT RIGHT! Turns out I had left the Phantom Power on on that input ofr the 442. Turned it off, everything sounded fine. Antagonistic power supplies. I've seen it before on ME66 and SHure VP88.

Otherwise pretty neat. Oh, and The base plate of the VideoMic is already drilled to accept a boom pole bolt.

Ty Ford

I just ordered this mike along with a Canon XL-2 and am wondering now if this will work correctly.

Canon specs say:
Front Microphone Input Terminal: -55 dBv (Auto),
-67 dBv (Manual/Vol.Max)/600 ohms

Am I going to be OK with this set-up?

-bob

I know the XL2 has XLR audio inputs. I don't believe the XL2 has 1/8 mini TRS jacks.

The Rode video mic end with a mini TRS. Rode makes a handy mini to XLR Male adapter that will allow you to plug right in. Just remember to turn off the Phantom Power on the XL2 and use the battery in the Rode VideoMic.

Regards,

Ty Ford

Won't have this stuff till early next week, but in looking at the pictures in the brochure I do see a mini jack on the right side of the camera.

Specs describe it as 03.5mm stereo mini-jack unbalanced.

If necessary, I will use the XLR adapter made by RODE. Would this then offer a solution to the different impedence figures?

Probably. That input a mic/line?

Ty

Looking at my copy of the XL2 manual it looks like the front mic connector is actually a pair of 3.5 stereo mini jacks. Don't know it for a fact but I'll bet you could plug the Rode into one to record on audio channel 1 and the other to record on audio channel 2.