lavalier sanken cos 11 to be plugged to mini jack trs for ew 100 g2
how do I have to plug a sanken cos 11 to mini trs plug for sennheiser ew 100 G2,
hot (2) on tip, cold (3) on ring and earth (3) on shield, does it work CONSIDERING THAT G2 IS unbalnced and connection for micro on sennhieser manual are tip to hot and cold and earth to shield, |
Re: lavalier sanken cos 11 to be plugged to mini jack trs for ew 100 g2
In the G2 the ring is not connected (it's the line-in connector) for the mic. input.
In the G3 the ring needs to be shorted to sleeve. The mic. should be connected to tip and sleeve only. |
Re: lavalier sanken cos 11 to be plugged to mini jack trs for ew 100 g2
Quote:
|
Re: lavalier sanken cos 11 to be plugged to mini jack trs for ew 100 g2
sorry, i have to plug it to trs mini, to be plugged in ew100 g2 transmitter
|
Re: lavalier sanken cos 11 to be plugged to mini jack trs for ew 100 g2
That's not what I asked. I know you need to connect to a TRS miniplug. What we need to know is what connector is on the mic cable now, not what you need to adapt it to. Or is it just bare wires? If it's bare wires, try this diagram from the Sanken web site ... http://www.sanken-mic.com/en/qanda/index.cfm/11.25 (3-wire) or http://www.sanken-mic.com/en/qanda/index.cfm/20.73 (2-wire). The general wiring sheme is shown here ... http://www.sanken-mic.com/en/qanda/index.cfm/4.19
|
All times are GMT -6. The time now is 04:03 AM. |
DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network