Any tips on getting the thing to move very slowly, i have put the gain settings to .50 .20 .40 and the yaw end point at 100 instead of 150 but it still seems to be moving very fast. Cheers any comment would be great. Steve

another thing you can try is extending the sticks. they are actually two pieces and you can unscrew them then re-tighten at a longer or shorter length. a longer stick should give you finer control.

Thanks Darren

the airnest or litchi app allow for specific speeds i believe

Thanks Bruce will look into that cheers

Extending the sticks works well. I've also seen these:

Quality 3D Print YAW Pitch Controller for DJI Phantom 3 Inspire 1 Video Panning | eBay (http://www.ebay.com/itm/Quality-3D-Print-YAW-Pitch-Controller-For-DJI-Phantom-3-Inspire-1-Video-Panning-/272051224647?hash=item3f57844047:g:a4UAAOSwkZhWTpO-)

Looks tacky but I think it would work well by adding resistance to the stick movements.

looks good Jody cheers