Hi folks

It's not mentioned in the manual. When I google this, not much comes back other than some people saying I need to get an adaptor on the multi connector. Yet other people say no need.

So where is the Lanc connection on the Z150?

Regards
Norman

The Z150 does have a standard LANC connector and it is located just below the headphone jack.
Shown at 35:30 in this video

Doug Jensen’s Sony PXW-Z150 & HXR-NX100 Master Class - CHAPTER ONE FREE! on Vimeo

Hi Doug

Thanks for the quick reply. The remote jack.

What threw me off is that the manual says "The REMOTE jack connects to a video
deck or other devices used to control playback."

Regards
Norman

2 ways to do it.
You can connect a 2.5mm controller to the remote port (back, under the headphones jack) but under the HDMI there is also a multi-terminal (USB) so you could use either a 2.5mm standard remote controller AND a second remote controller via multiport ( Sony rmvpr1 or fotga rmvs1) or you could even connect a standard 2.5mm remote to it with a multi to lanc cable ( Acebil Zoom Control Cable with 2.5mm to Sony Multi-Terminal that I use at the moment with a libec 3dv controller because I shoot both sony and panasonic and the libec gives both protocols).

for example 1 controller for zoom and a second controller for focus (say a focus puller?)