|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
August 10th, 2009, 10:26 AM
|
#1 |
|
Sponsor: Abel CineTech
Join Date: Feb 2009
Location: New York, NY
Posts: 361
|
5D Mark II with an Arri MMB-1 Mattebox
AbelCineTech just started selling the 5D Mark II and Canon lenses. So of course I've put together a Arri mattebox kit for it. It's the MMB-1 with a custom riser, belows back, and step-down/up rings. Check out the video on our blog -
Canon 5D Mark II & The Arri MMB-1 Mattebox | CineTechnica
__________________
Andy Shipsides -Camera Technology Specialist AbelCineTech, New York - Visit our Blog - http://blog.abelcine.com |
|
|
|
August 10th, 2009, 04:36 PM
|
#2 |
|
Regular Crew
Join Date: Aug 2006
Location: Oshkosh, WI
Posts: 190
|
Andy any ballpark figure for cost on this?
Jerry |
|
|
|
|
August 10th, 2009, 04:56 PM
|
#3 |
|
Inner Circle
Join Date: Nov 2005
Location: Elk Grove CA
Posts: 6,838
|
Fine for tripod, but for shoulder mount, you will need to get get camera offset, with a a viewfinder magnifier and longer rails to mount shoulder pad... something like this:
My Rig By Chris Barcellos on Vimeo Admittedly a bit dated and low budget, but this is general idea where a total system should go.
__________________
Chris J. Barcellos |
|
|
|
|
August 11th, 2009, 06:13 PM
|
#4 |
|
Sponsor: Abel CineTech
Join Date: Feb 2009
Location: New York, NY
Posts: 361
|
The kit is approximately $2,400. It's well suited for a tripod, but I'd also use the MMB-1 with a handheld rig with the proper offset.
__________________
Andy Shipsides -Camera Technology Specialist AbelCineTech, New York - Visit our Blog - http://blog.abelcine.com |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
