Remote start/stop + ext. monitoring for 5D on jib
 

Has anyone tried/tested a workable solution for use of a 5D on a long jib (18 feet and above)? For example, Canon's wireless remote system + laptop? Need remote start/stop + monitoring. Any thoughts from experience, tips, including any techniques to minimize rolling shutter would be greatly appreciated.

Thanks!

Can't recommend a wireless remote -- wired is the way to go since you'll have to run cable for a remote monitor anyway. Canon has a couple of wired remotes that are compatible with the 5D Mk. II, but I'm not sure which ones offer more than just a shutter release (obviously you'll need one that can activate the Set button to initiate video recording). Here are the Canon model numbers:

Remote Switch RS-80N3
Timer Remote Controller TC-80N3

There's also a 33-ft. extension: Extension Cord ET-1000N3

We have lots of threads already going on the subject of remote monitoring via HDMI and standard definition video output.

Hmm, not sure about the RS-80N3... looks like it might be just a remote shutter release. Not what you need.

The TC-80N3 seems to hold more promise regarding the use of the Set button; I've included the manual here as a .PDF attachment for download.

I have the little wireless RC-1 and it will work for this application but I still think wired is a better way do it.

Then there's wired remote control and monitoring via software on a laptop-- this might be the best solution:

DSLR Remote Pro - Remote Capture Software for Canon EOS

Think I'll have to download the trial version and see how it goes... comparing
it to the free EOS Utility remote shooting app that came with the camera.

Remote compatable with the Set Button.
 

I have read this forum with interest including the PDF for the TC-80N3. Can anyone confirm the remotes that are available to work with the 'Set' button.

It's nto referred to in the PDF. I have read the RC1 works with the set button on the canon site.

With regards

Jeff

Sorry won't work
 

I own both these releases and neither is designed to do anything but operate the shutter button. This again is possibly another one of the benefits of the 7D. The 7D does allow you to reassign button controls. I wonder it it would allow you to swap the start/stop button with the shutter.

hi all-

the RC-1 works as an IR remote start/stop for the video mode - it's even documented in the 5dM2 user manual.

I wonder if it's feasible to mount the RC-1 or the Arduino up at the camera, but crack the case (for the RC-1) & wire in a remote 'button'?


I wonder if the good folks over at Pocketwizard could make their MultiMax remotes trigger the video mode?

----

and FWIW - I've used the RC-1 with a camera mounted high up on a ladder, with an HDMI monitor slung lower so I (& the director) could see the shot. The problem is that the process of hitting record takes even longer- IE normally it takes about 5 seconds to make the switch from HD composition view to SD shooting view. The IR adds more time to that, and you have no confirmation that you 'hit' the sensor - so you have to aim, click and wait. And if it doesn't work, try it again. and again. which is a bit nerve wracking when you have talent and a director waiting on camera.


cheers

-andy

ml

I think that the iPhone app DSLR Remote might have some promise - it's not there yet for video, but for still shooting it's pretty sweet.
DSLR Camera Remote - onOne Software

Supposedly using it to control the video mode is one of the most requested features.

The EOS utility disc that came with the camera works pretty well - run a USB cable and you can remote start/stop, have a reasonable viewfinder and you can adjust shutter/fstop and focus from the laptop. You also have the option to record in the camera or the computer.

Thanks for the responses.
 

Hello All,

Thanks for the responses. I was keen on the CR1 until I read about the lag and hit and miss. I'll wait for a wired solution I think as I like to record from a tripod with a remote to eliminate camera shake.

With regards

Jeff

I'll second the recommendation to use the EOS utility & a laptop. I have used this with a USB extender cable with the camera on top of a 7m (22') pole.

I see little point to the iPhone application even aside from the fact that it doesn't work with video. The camera still needs to be to be tethered via USB to a computer unless you are using the rather expensive Canon WiFi unit.

On a jib there are two laptop solutions, both require Eos utility: either a long active USB repeater cable like this one SIIG USB 2.0 Active Repeater Cable USB extender - External

or using a wft-e4II wireless pack on the camera and connecting via wifi or ethernet Canon | WFT-E4 IIA Wireless File Transmitter (WFT) | 4263B001

Dan

you can also find a bunch of USB extenders at Gefen

Gefen Inc. - Product List - Choose Product Type...

The point of the DSLR Camera Remote iphone app is that I am no longer tethered to the computer. I can walk on set, away from both the camera and computer and shoot.

Andy,

Yes Gefen make great stuff, they also do HDMI extenders using Cat 5 for monitoring as well.

As for the DSLR remote app I didn't think it could trigger video yet? or are you just talking about stills?

Dan

Ah, I see. I was concerned that the camera was still tethered. It hadn't occurred to me about the operator still being tethered:-)