Will Stuck Tape problem REAPPEAR after Repair at DVinfo.net

David Ruhland · July 23rd, 2008, 05:17 AM

I just had to send out my GL2 to Canon for the infamous stuck tape, and REmove Tape error. I am lucky it is still under warranty. It has less then 10 hours on it. I am just curious for those of you that have had the repair performed by Canon, has the problem re occured. If so, I may be looking to change cameras!

I have a HV30 as a back up and knock on wood, no probs with this camera to date.

Thanks...

David L. Holmes · July 23rd, 2008, 08:20 PM

It's kind of like asking how long will a light bulb last. Yes it will fail again. Maybe in 2 days, maybe in 10 years, but it will fail again. I've owned my GL2 for over 2 years and have never had a problem. Someday I will have this error, and I will deal with the situation when it happens.

From what I've read online, it does appear in cameras that have been exposed to cold weather, then brought indoors and have had condensation form inside the camera. Living in Wisconsin, you could be susceptible to this. Let your camera warm up slowly before using it and you should be fine.

Good luck!!

Don Palomaki · July 24th, 2008, 08:15 PM

A number of years ago I ran into a similar problem with a Canon L2 - the source was a switch in the tape mechanism that was not making good contact, probably the result of minor corrosion on contacts. After repair, it did not recur for the 4 or so years remaining before I switched to DV.

July 23rd, 2008, 05:17 AM	#1
David Ruhland Regular Crew Join Date: Dec 2007 Location: Rice Lake WI , Wisconsin Dells, WI Posts: 165	Will Stuck Tape problem REAPPEAR after Repair I just had to send out my GL2 to Canon for the infamous stuck tape, and REmove Tape error. I am lucky it is still under warranty. It has less then 10 hours on it. I am just curious for those of you that have had the repair performed by Canon, has the problem re occured. If so, I may be looking to change cameras! I have a HV30 as a back up and knock on wood, no probs with this camera to date. Thanks...

July 24th, 2008, 08:15 PM	#3
Don Palomaki Wrangler Join Date: Sep 2001 Location: Northern VA Posts: 3,310	A number of years ago I ran into a similar problem with a Canon L2 - the source was a switch in the tape mechanism that was not making good contact, probably the result of minor corrosion on contacts. After repair, it did not recur for the 4 or so years remaining before I switched to DV. __________________ dpalomaki@cox.net

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

July 23rd, 2008, 08:20 PM	#2
David L. Holmes Regular Crew Join Date: Nov 2005 Location: Detroit, MI USA Posts: 92	It's kind of like asking how long will a light bulb last. Yes it will fail again. Maybe in 2 days, maybe in 10 years, but it will fail again. I've owned my GL2 for over 2 years and have never had a problem. Someday I will have this error, and I will deal with the situation when it happens. From what I've read online, it does appear in cameras that have been exposed to cold weather, then brought indoors and have had condensation form inside the camera. Living in Wisconsin, you could be susceptible to this. Let your camera warm up slowly before using it and you should be fine. Good luck!!