DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon VIXIA Series AVCHD and HDV Camcorders (https://www.dvinfo.net/forum/canon-vixia-series-avchd-hdv-camcorders/)
-   -   HFG20 Part Number? (https://www.dvinfo.net/forum/canon-vixia-series-avchd-hdv-camcorders/514523-hfg20-part-number.html)

Adam Palomer February 23rd, 2013 05:23 AM

HFG20 Part Number?
 
I own the G10 and I'd like to replace the lens shade with one like the G20's.

Does anyone know the part number to purchase the HF-G20 lens shade separately?

I might be interested in an aftermarket lens shade, though, if you can recommend a similar one.

Chip Gallo February 23rd, 2013 10:39 AM

Re: HFG20 Part Number?
 
Is the G20 shade functionally better? I have to replace a G10 one.

Adam Palomer February 23rd, 2013 02:42 PM

Re: HFG20 Part Number?
 
From what I could see in videos online, it seems to have a built in flag and/or lens cap.

Right now, with the factory lens shade, I'm covering the lens with a lens cap that goes on by squeezing the center. I have to use that cap because of the filters I've installed. The cap doesn't fit well and sometimes falls off so it's not so user friendly.

A lens shade like the one on the G20 would be a huge improvement for me.

Jeff Harper February 24th, 2013 07:51 AM

Re: HFG20 Part Number?
 
The G20 has not hit the streets yet. You probably cannot buy parts for a camera that hasn't yet been released.

You can check with B&H, call them and they'll tell you the scoop on it.

Don Palomaki February 25th, 2013 02:33 PM

Re: HFG20 Part Number?
 
Canon usually lists their phone number for support on back cover of the manual. You should be able to get parts information there once it is available.

Adam Palomer March 1st, 2013 05:48 PM

Re: HFG20 Part Number?
 
I called Canon's parts department. They didn't find the HFG20 in their computer and only found the XA10 and the HFG10.

It looks like it's going to be a few months before that part can be ordered.

Don Palomaki March 4th, 2013 06:52 AM

Re: HFG20 Part Number?
 
Still shows up as in "pre-order" status at B&H.
The January press release said February availability.
I suspect it will be a bit longer for common availability.

Adam Palomer June 26th, 2013 09:38 PM

Re: HFG20 Part Number?
 
Would anyone like to add any updates they might have? I have not called Canon to inquire again about this part.

David Johns June 27th, 2013 10:40 AM

Re: HFG20 Part Number?
 
From a comment on my YouTube channel:

"The part number for the lenshood is D52-0380-000. I bought it from Convena. It costs 30€. The hood fpr HF G10 is D52-0370-000 and costs 9€. They are interchangable."

Hope that helps,
Dave

Adam Palomer June 28th, 2013 11:07 PM

Re: HFG20 Part Number?
 
Thanks....

Tom Kilgore July 7th, 2013 03:54 PM

Re: HFG20 Part Number?
 
I am in the U.S. and Convena doesn't seem to have a ship to U.S. ability. I tried to order, but there is no United States, America, or U.S.A. listed under the country selection. ????
I emailed Canon, and they said to call the Canon service parts number.
Anyone in the States ordered this part successfully yet?


All times are GMT -6. The time now is 08:46 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network