Rode NTG-1 and battery life at DVinfo.net
DV Info Net

Go Back   DV Info Net > Canon EOS / MXF / AVCHD / HDV / DV Camera Systems > Canon HDV and DV Camera Systems > Canon XH Series HDV Camcorders

Canon XH Series HDV Camcorders
Canon XH G1S / G1 (with SDI), Canon XH A1S / A1 (without SDI).

Reply
 
Thread Tools Search this Thread
Old August 13th, 2007, 03:14 PM   #1
Regular Crew
 
Join Date: Sep 2003
Location: Kansas City KS
Posts: 60
Rode NTG-1 and battery life

I've searched this forum for information about using this phantom-powered mic on the A1, but nothing has mentioned how it's use effects the run time of the A1's battery. It draws 3.5 mA according to the Rode specs, while something like the AT 897 draws 2. Would that difference be enough to noticabley shorten the time you could shoot on a battery? Thanks.
Jim Schweer is offline   Reply With Quote
Old August 13th, 2007, 03:32 PM   #2
Regular Crew
 
Join Date: Feb 2007
Location: Ens, The Netherlands
Posts: 198
Hi Jim,

Let's asume you have the BP950 battery, or even better: the BP970.

The BP950 has a capacity of 5200 mAh. That means it can give the camera about 5200 mA per hour. The camera runs about 4-5 hours on that battery, so that would mean it uses about a 1000 mA per hour.
Looking at the 3.5 mA would mean that the camera would run 12.6 seconds shorter on the battery if I calculated it right.
With 2 mA it would mean 7.2 seconds. So the difference is 5 seconds shorter filming.

I don't think you have to know the results with the BP970......

3.5 mA or 2 mA are absolutely no problem......
__________________
http://www.hdvinfo.nl The Dutch forum and website about HDV & Canon XH-A1
Gert Kracht is offline   Reply With Quote
Old August 13th, 2007, 03:54 PM   #3
Contributor
 
Join Date: Jan 2003
Location: Kansas City, MO
Posts: 4,449
I've been wondering about the quality of that Røde mic. It's really a low price. Has anybody used it for critical things?
Bill Pryor is offline   Reply With Quote
Old August 13th, 2007, 04:23 PM   #4
Regular Crew
 
Join Date: Sep 2003
Location: Kansas City KS
Posts: 60
Thanks, Gert. There's nothing quite like a completely factual answer.

Bill, my interest in the NTG-1 stems from my use of Rode's NT3 mic and hearing it's results played in a theater.
Jim Schweer is offline   Reply With Quote
Old August 14th, 2007, 01:16 AM   #5
Major Player
 
Join Date: Apr 2007
Location: Espoo Finland
Posts: 380
Rode NTG-1 and NTG-2 (same thing as far as audio goes) are the best cheap(esh) short shotguns. You would have to pay 2-3 times more to get real improvement. Many pro productions have been done with those with no complaints.
Petri Kaipiainen is offline   Reply With Quote
Old August 14th, 2007, 06:58 AM   #6
Wrangler
 
Join Date: Sep 2001
Location: Northern VA
Posts: 4,487
As Gert notes, the impact of the Rode mic (or the AT) on available runtime would be insignificant (less half a percent).

The Rode NTG-1/2 appear to be excellent shotgun mics for their price point. Arguably roughly comparable to the AT-897, although some people like Rode better, and some prefer AT.
__________________
dpalomaki@dspalomaki.com
Don Palomaki is offline   Reply With Quote
Old August 14th, 2007, 04:07 PM   #7
New Boot
 
Join Date: Apr 2007
Location: Oxford, UK
Posts: 19
I'm using an NTG1 and it's pretty decent. Audio quality wise compared with top mic's I'd give it a 6/10. I have found that even if wrapped in rubber mounted in the mic holder it picks up more handling noise than I'd like so now tend to get a mic stand and place the mic above the subjects pointing down and run a long cable to the cam.

I picked up a bargain non brand but obviously pro tie clip that runs on phantom power on eBay for £30 the other month and it's even better. I place in on the table etc pointing towards the subject.

As I work mostly in recording studios I can borrow some pretty exotic mics, I recorded a feature with Tony Visconti (producer for T Tex etc) and had a super Neuman mic, it just sounds astonishing. Used in figure 8 pickup pattern, interviewer one side and subject the other it was super crisp and kept background noise out. I think that the mic pre's on the Canon are very good as you can really hear the difference in the mics.
Mike Banks is offline   Reply With Quote
Old August 14th, 2007, 04:29 PM   #8
Regular Crew
 
Join Date: Aug 2007
Location: Louisville KY
Posts: 41
I just recently ordered the xh a1...I also have the at897 so when I get time this weekend I will see how well it works. Is there a post anywhere to show pictures of people xha1 setups. I would love to see them.
Trent Humphrey is offline   Reply With Quote
Old August 15th, 2007, 03:14 PM   #9
Regular Crew
 
Join Date: Feb 2007
Location: Ens, The Netherlands
Posts: 198
Not only did I answer the question. I also learned from the other reactions. I was looking around for a reasonable microphone for a while and had not heard about these two. So, thanks for the 'tip' Jim. :-)
__________________
http://www.hdvinfo.nl The Dutch forum and website about HDV & Canon XH-A1
Gert Kracht is offline   Reply With Quote
Old August 15th, 2007, 04:00 PM   #10
Regular Crew
 
Join Date: Sep 2006
Location: Oslo, Norway
Posts: 106
I have the SM-5 holder for my NTG-2. Seems to do a reasonably good job at dampening things.
__________________
"Those who dream by day are cognizant of many things which escape those who dream only by night."
-- Edgar Allan Poe
Even Solberg is offline   Reply With Quote
Old August 15th, 2007, 11:46 PM   #11
Regular Crew
 
Join Date: May 2007
Location: North Andover, Ma
Posts: 102
NTG1 is too thin for the A1 mic holder. So how you guys deal with this? Wrap some duct tape around the mic?
Juni Zhao is offline   Reply With Quote
Old August 16th, 2007, 01:58 AM   #12
Regular Crew
 
Join Date: Sep 2006
Location: Oslo, Norway
Posts: 106
I use this:
http://www.rodemic.com/?pagename=Products&product=SM5

Works fine.
__________________
"Those who dream by day are cognizant of many things which escape those who dream only by night."
-- Edgar Allan Poe
Even Solberg is offline   Reply With Quote
Old August 16th, 2007, 06:43 AM   #13
Wrangler
 
Join Date: Sep 2001
Location: Northern VA
Posts: 4,487
I have placed a couple turns of black gaffer tape around the NTG-2.
__________________
dpalomaki@dspalomaki.com
Don Palomaki is offline   Reply With Quote
Old August 16th, 2007, 09:27 AM   #14
Contributor
 
Join Date: Jan 2003
Location: Kansas City, MO
Posts: 4,449
You could go to a hardware store and get a couple of O-rings to put around the mic.
Bill Pryor is offline   Reply With Quote
Old August 17th, 2007, 02:38 PM   #15
Regular Crew
 
Join Date: Aug 2006
Location: Mobile, Alabama
Posts: 166
I just wrap a paper towel around the mic. and kinda on the subject but an off question, but I've always just thrown a AA battery in the mic how do I use the phantom power on the cam without needing a duracell? thanks
Mark Leonard is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > Canon EOS / MXF / AVCHD / HDV / DV Camera Systems > Canon HDV and DV Camera Systems > Canon XH Series HDV Camcorders

Thread Tools Search this Thread
Search this Thread:

Advanced Search

 



All times are GMT -6. The time now is 12:20 AM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network