DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   Cinema look ? (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/104039-cinema-look.html)

Sophie Johnston September 21st, 2007 04:23 AM

Cinema look ?
 
What is the cinema/film look that some people seem to prefer, I have a Canon HX A1 camera PAL can it record in cinema mode ? Do you only use this mode if you are recording a drama ?

Steven Dempsey September 21st, 2007 05:16 PM

Sophie, this is a question with an answer the size of "War and Peace". Essentially, 24f gives you the same frame rate as a movie camera shoots. It gives more of a film look than 60i or 30p, which tend to be more videoish, kinda like you would see on daytime soap operas or typical "home video"

Google "film look" and search for filmlook, film look, 24p, etc. on this site and you should find lots to read.

Brandon Freeman September 21st, 2007 06:09 PM

Another important and often forgotten thing about the "film look" is increased dynamic range, which is actually (IMO) NOT achieved by using Cinema Gamma modes. Instead, stretch your blacks, crush your whites (knee, low setting) -- all of which are settings you can alter in camera with the presets -- and IMO leave colors at normal levels. Then, in post, you can play with increasing contrast (which actually decreases dynamic range), controlling what gets crushed and what gets clipped, if that makes any sense.

Kenny Shem September 24th, 2007 01:42 AM

pardon me for asking what do you mean by stretch black and crush whites? U mean increase the contrast?

Quote:

Originally Posted by Brandon Freeman (Post 748182)
Another important and often forgotten thing about the "film look" is increased dynamic range, which is actually (IMO) NOT achieved by using Cinema Gamma modes. Instead, stretch your blacks, crush your whites (knee, low setting) -- all of which are settings you can alter in camera with the presets -- and IMO leave colors at normal levels. Then, in post, you can play with increasing contrast (which actually decreases dynamic range), controlling what gets crushed and what gets clipped, if that makes any sense.


Erik Norgaard September 24th, 2007 02:51 AM

Quote:

Originally Posted by Kenny Shem (Post 749050)
pardon me for asking what do you mean by stretch black and crush whites? U mean increase the contrast?

If you go into customize, you can stretch blacks and crush whites by toggling BLACK (BLK) and KNEE (KNE) respectively.


All times are GMT -6. The time now is 02:08 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network