DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XH Series HDV Camcorders (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/)
-   -   New owner - stupid card question (https://www.dvinfo.net/forum/canon-xh-series-hdv-camcorders/135218-new-owner-stupid-card-question.html)

Bill Fredette October 4th, 2008 10:44 AM

New owner - stupid card question
 
Hi, all. My A1 arrived on Thursday. Since I've been combing these forums for awhile, I was all set with a custom list of presets. I copied them to the supplied SD card via my laptop and put the card in the camcorder, but it doesn't seem to be recognized. I get no "card error" message, but when I try to load the presets from the card, the little "card to camera" icon is ghosted out (the "camera to card" icon is active).

I thought I might have to initialize the card, but I cannot for the life of me find the "card operations" sub menu mentioned on page 124 of the manual. I switched the little card/camera selector above the standby/lock switch, but that doesn't seem to have any effect on the menus. I'm sure the card is inserted correctly. Am I missing something obvious?

Thanks in advance,

Bill

[edit] Got it partially sorted. I had to move my presets into a directory called PRESET on the card. Now I can load them, but I still don't see the "card operations" menu anywhere.

Julian Frost October 4th, 2008 02:19 PM

Do you have the A1 set to VCR mode (using the main power/mode dial on the left side of the camera) *and* the Tape/Card switch set to "Card"? You have to be in VCR mode and have the switch set to Card before you'll see the Card Operations option in the Menu.

Bill Fredette October 4th, 2008 02:45 PM

Quote:

Originally Posted by Julian Frost (Post 946928)
Do you have the A1 set to VCR mode (using the main power/mode dial on the left side of the camera) *and* the Tape/Card switch set to "Card"? You have to be in VCR mode and have the switch set to Card before you'll see the Card Operations option in the Menu.

That's probably it. Wasn't clear to me in the manual. Thanks for the help!

Roger Lee October 4th, 2008 04:25 PM

Quote:

Originally Posted by Bill Fredette (Post 946933)
That's probably it. Wasn't clear to me in the manual. Thanks for the help!

Hello Bill,

Welcome to the world of XH A-1. I found I had lots of questions re: my A-1 that the manual and this forum could answer.

IMHO...the XH A-1 is still the camera of choice for what I want to do...sports and wildlife.

Best of luck.

Rog Lee

Alan Craig October 5th, 2008 02:49 AM

Hi Bill what you need to do is copy all the preset files to a Directory on your card called "PRESET" once you have all the files inside this Directory on your card put the card back in the camera and switch to one of the record modes not vcr go into the menu and go to customize and select custom preset you should then be able to see the custom presets Regards Alan

Bill Fredette October 5th, 2008 08:53 AM

Hi, Roger. Thanks for the welcome. I have spent the past two days shooting (mainly autumn scenics since the colors are peaking here in Upstate NY) and I am really, really happy with this camera. I used to work in public television before taking off seven years to go to med school and into a pediatrics residency. The A1 is my reward to myself upon signing a contract. (The trip to Ireland it will document is my reward to my wife and three sons who have put up with so much these past years). It feels soooo good to get out and shoot again!

Alan, thanks for your reply, too. I managed to figure out the PRESET folder requirement after sifting through the posts here. Maybe it was just my post call haze, but the manual seemed less than clear on all of this.

I plan to spend lots of time around these parts tapping the collective brain on peripherals, etc.

Bill


All times are GMT -6. The time now is 01:28 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network