DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Canon XL and GL Series DV Camcorders (https://www.dvinfo.net/forum/canon-xl-gl-series-dv-camcorders/)
-   -   XL-2 Problem - Purple Artifact on 16:9 Mode (https://www.dvinfo.net/forum/canon-xl-gl-series-dv-camcorders/64517-xl-2-problem-purple-artifact-16-9-mode.html)

Shervin Mandgaryan April 6th, 2006 02:40 PM

XL-2 Problem - Purple Artifact on 16:9 Mode
 
Hello,

I recently purchased a Canon XL-2 and noticed on 16:9 there is a purple artifact on the top left of the footage. It does not happen on 4:3 nor does it not happen in very brightly lit areas in which the image is saturated (Iris opened to the max). I believe this has something to do with the CCD's being damaged, but if theres an option or something to do to fix it, I would like to know it.

http://img394.imageshack.us/img394/7...ture2346lt.jpg

A picture of the problem.

Thanks,

Shervin

Shervin Mandgaryan April 7th, 2006 02:54 PM

Hello all,

I recently fixed the problem, looked like my lens had a peice of small fabric between the lens and the ccd's. Upon closer inspection I removed the fabric and cleaned my lens out.

Works like a charm now!

Shervin

Eric Brown April 7th, 2006 07:04 PM

small piece of fabric. How the heck did that get in there? Congratulations on it not being CCD damage.

Shervin Mandgaryan April 8th, 2006 08:49 AM

It was probobly off my shirt or something, but I am really glad that it wasnt CCD damage, otherwise Canon would have to come to my aid again...

Shervin Mandgaryan April 11th, 2006 08:52 PM

Hello all,

This problem is re occuring again, that peice of fabric I removed was near the middle of the camera, and was colored black.

I thought the CCD's might have picked up the color black on the lens and misinterpreted it, but after removal I did some more test footage and the problem re occured.

This problem only happens in a blue moon, but if there is a problem in this camera I would like to get it fixed whether this happens very rarely.

How do I go about requesting a repair from Canon? I heard rumours that the XL-2 is not supported by Canon anymore and I might be out of luck with my warrantee.

Any help would be greatful.

http://img135.imageshack.us/img135/2...ure66789qu.jpg

Another picture of the problem (Shot in SP)

Shervin,

Richard Hunter April 11th, 2006 11:18 PM

Hi Shervin. Are you not able to take the camera back to your dealer to handle the warranty repair? That would be the simplest option if it is open to you.

Where did you hear about Canon not supporting XL2 anymore? This is still a current model (AFAIK) so I think it is pretty unlikely that it is not supported.

Richard

Chris Hurd April 11th, 2006 11:23 PM

It was on the prism face of the CCD block. No biggie. Not possible to actually damage the CCDs as they are mated directly to the prism itself... nothing can get in there. CCD damage is usually electrical in nature.

And that "rumor" is ridiculous, and please do not spread rumors here of any sort (except in our Area 51 forum where they're encouraged). Of course the XL2 is supported by Canon. It's a current product. Even when it's eventually phased out, Canon will continue to support it and service it for seven years past its end-of-life date. That policy is in place for all manufacturers, not just Canon.

Shervin Mandgaryan April 19th, 2006 06:03 PM

Can this problem be solved by a quick trip to a canon repair service center? Or do I actually have to ship this bad boy to canon?

Thanks.


All times are GMT -6. The time now is 07:55 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network