xlr question at DVinfo.net

Dale Guthormsen · June 18th, 2011, 03:51 PM

Good afternoon,

At one time a year or two back I unthinkingly pulled an plug before the camera was off, or maybe I plugged it in, can't recall. All seemed well till recently.

Now, when I plug in a mics to one and/or two, I do not get audio, but if i I use the all audio I get both mics working.

I went through the manual again but can't seem to get theings right. Am I missing something or does it need to go in the shop?

thank you,

Richard Alvarez · June 18th, 2011, 04:56 PM

Does the mic require phantom power? Make sure the phantom power switch is on or off -depending on what the mic needs.

Make sure the audio selection switches are properly set. "Rear" audio, manual, 1 or 2, and the audio knobs are turned up.

June 18th, 2011, 03:51 PM	#1
Dale Guthormsen Inner Circle Join Date: Jun 2005 Location: Saskatchewan Posts: 3,048	xlr question Good afternoon, At one time a year or two back I unthinkingly pulled an plug before the camera was off, or maybe I plugged it in, can't recall. All seemed well till recently. Now, when I plug in a mics to one and/or two, I do not get audio, but if i I use the all audio I get both mics working. I went through the manual again but can't seem to get theings right. Am I missing something or does it need to go in the shop? thank you, __________________ DATS ALL FOLKS Dale W. Guthormsen

June 18th, 2011, 04:56 PM	#2
Richard Alvarez Inner Circle Join Date: Sep 2002 Location: San Mateo, CA Posts: 3,840	Re: xlr question Does the mic require phantom power? Make sure the phantom power switch is on or off -depending on what the mic needs. Make sure the audio selection switches are properly set. "Rear" audio, manual, 1 or 2, and the audio knobs are turned up.