Settings for XLH1 to DVX
 

Here are the settings I used to make a closer match between my XLH1 and my DVX-100A. A greyscale chart and waveform/vectorscope and 19inch CRT monitor where used. These settings work best in 3200K and I don't know if they apply to any other DVX-100A or XLH1. Also the Knee in the DVX-100A seemed to only have an auto setting. I was using the XLH1 in manual mode and used the low setting for the Knee but Auto might be better in some situations, HTH This was for a 30F shoot but I didn't see much difference in 60i or 24F as far as the scopes where concered

DVX Cinelike Gamma Everything is else zeroed out except for auto exposure -1

XLH1 Custom Preset 3200K Preset White Balance
Gamma Cine 2
Knee Low or Auto
Black Middle
Master Ped +3
Set Up 0
Sharp -5
HDF Low
DHV 0
Cor 0
NR1 off
NR2 Off
CMX Normal
CGN -2
CPH 0
RGain -1
GGain -1
BGain -1
RGM 0
RBM 0
GRM 0
GBM 0
BRM 0
BGM 0

Split from this thread: http://www.dvinfo.net/conf/showthread.php?t=68234

Daniel's preset is available for download from our XL H1 Custom Presets library.