|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
December 14th, 2006, 05:36 PM
|
#1 |
|
New Boot
Join Date: Nov 2006
Location: Santa Monica, CA
Posts: 16
|
Constant breaks when digitizing
We're digitizing from an XL-H1 for the first time. We shot 24F NDF Freerun. We're digitizing over firewire to an imac with FCP 5.1.2 onto a G-Raid drive. We're using the 1080P24 easy setup. The footage shows up fine, but we it stops digitizing every 5 to 20 seconds and makes a new clip. We got halfway through a tape and realized we had 200 clips in the bin. Does anyone know what would cause this?
Update: Now, it says "Stream Problem. Capture was stopped due to a problem with the incoming stream...." We have tried multiple tapes.
__________________
Last edited by Alexis Hanawalt; December 14th, 2006 at 06:08 PM. |
|
|
|
December 14th, 2006, 10:45 PM
|
#2 |
|
Major Player
Join Date: Sep 2005
Location: Pleasanton, CA
Posts: 258
|
FWIW, DVRack breaks the video input into a large number of small files if the CPU is overwhelmed. Closing all but the necessary subwindows gives the CPU some headroom and fixes the problem.
Best, Christopher |
|
|
|
|
December 14th, 2006, 11:29 PM
|
#3 |
|
New Boot
Join Date: Nov 2006
Location: Santa Monica, CA
Posts: 16
|
We got the problem to go away, but we're not sure how. I'll post again if I discover what the issue was.
__________________
|
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
