Wired Color change?
 

Hi,

I was on a shoot, after viewing the tape for logging.
i have noticed that the color change from let's say normal to a red-orange tint.

How could this happend, does the Camera have a error? I had all setting on Manual.

here is a sample
http://homepage.mac.com/shaggyalienf...eTheater1.html

Thanx

Shaggy

Did the lighting change? How was the white balance set?

Hi,

no except for the laser in the Cabin.

I did the white balance under the used lighting
with a white paper if you mean that?

Shaggy

Did it change once, or did it start to change back and forth at a farily constant rate? (can be caused by using high shutter speeds with flourescent or other discharge type lighting)

Is it related to scene content or camera angle, as in a shift from mainly artificial to natural light? (scenes with incandescent lighting can look much more orange, and the camcorder will see this while the eye automaticaly adapts)

Laser in the cabin? Could you describe the lighting conditions in the cabin and the camcorder settings?