XL1/1s back outputs
 

Hi
Has anybody got any technical details of the back phono outputs and also is that a dc output at the back?

The yellow RCA jack is composite video output, nominally 75 ohms, 1 volt p-p.

The red and white RCA jacks are the Audio 1 input/output jacks., nominally 600 ohm input impedance. When in output mode, the output impedance is on the order of 3K and nominally line level.

The 4-pin DIN jack is S-VIDEO output.

The small 2.5 mm jack provides 5 vDC power for the MA-100 or MA-200 XLR adapter, and can also power (on the LX1) an RU-E3a RF unit (for Channel 3/4 output).

The green 3.5mm phone jack is for head phones

hmmmmmmmm
 

only 5v

the mod im doing needs 12v dc. ohwell just have to wait till the parts arrive to see what i can do

Thanks

And I suspect that the 5 vDC has a rather limited power capacity in terms of milliamps. It is not designed to power significant loads.

thanks
 

hmmm, the device i would of hoped to try would use upto 100mw. but it needs 12v