|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
March 14th, 2010, 08:42 AM
|
#1 |
|
New Boot
Join Date: Apr 2009
Location: Dothan, AL
Posts: 10
|
Live Feed Help
I would like to set up my XL1S as a live feed camera direct to a monitor/tv. The camera will be static on a tripod focused on center stage. The monitor/tv will be at stage sides.
What is the simplest effective setup to accomplish this? Of course, I do need both audio and video. Many thanks. |
|
|
|
March 14th, 2010, 10:27 AM
|
#2 |
|
Major Player
Join Date: Mar 2007
Location: North Hollywood, CA, United States
Posts: 807
|
If it's just direct into one monitor, then use long RCA or BNC cables, like this: HDMI Cable, Home Theater Accessories, HDMI Products, Cables, Adapters, Video/Audio Switch, Networking, USB, Firewire, Printer Toner, and more!
If you are feeding multiple monitors, you might need a distribution amplifier so you don't get signal loss. |
|
|
|
|
March 14th, 2010, 01:21 PM
|
#3 |
|
New Boot
Join Date: Apr 2009
Location: Dothan, AL
Posts: 10
|
Thanks.
The run is only about 40 feet so would an S cable do the job for one monitor. |
|
|
|
|
March 14th, 2010, 01:24 PM
|
#4 |
|
Major Player
Join Date: Mar 2007
Location: North Hollywood, CA, United States
Posts: 807
|
Yea, an S-video cable would probably work, but you would still need 2 RCA cables for the audio.
|
|
|
|
|
March 14th, 2010, 01:31 PM
|
#5 |
|
New Boot
Join Date: Apr 2009
Location: Dothan, AL
Posts: 10
|
OK Thanks.
|
|
|
|
|
March 21st, 2010, 07:54 AM
|
#6 |
|
Wrangler
Join Date: Sep 2001
Location: Northern VA
Posts: 4,487
|
Not that you will need to turn the display off to avoid the no tape and time code nags. Yyou could run tape in the camcorder to record the proceedings, but then you need to change tapes if the event runs longer than one tape.
__________________
dpalomaki@dspalomaki.com |
|
|
|
|
| ||||||
|
||||||
|
|
