DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   CineForm Software Showcase (https://www.dvinfo.net/forum/cineform-software-showcase/)
-   -   New releases for Mac and PC are out. (https://www.dvinfo.net/forum/cineform-software-showcase/486156-new-releases-mac-pc-out.html)

David Newman October 14th, 2010 09:10 PM

New releases for Mac and PC are out.
 
1 Attachment(s)
PC versions is at 5.2.0
Mac version is at 5.0.23

Download from cineform.com

Highlights form the PC release notes

* HDLink can now generate proxies
* more control of the Decoder for speed and 422 to 444 upsampling.
* more 3D control
* more CS5 integration for MOV files.
* enhancement to FirstLight and manual updates.
* Support for MXF 4:2:2 cameras like the Canon XF300 series (NeoHD and above.)
* lots of bug fixes.

Mac also gets many similar enhancements. Please try out the beta 5 version of FirstLight, this operates far more like the FirstLight addition on the PC. This will soon replace the old FirstLight on the Mac.

Sorin Pricop October 15th, 2010 05:19 AM

No downloadlinks. That means they are available from cineform website via support ... right ?

Justin Lovell October 15th, 2010 07:44 AM

Awesome!! I love new builds :)

neg invert glitch.

It works properly sometimes, but not anymore. 514 build was a little glitchy too.
I thought it was working correctly, then, i adjusted my WB and it stopped working correctly.

With White balance turned off, it flips normally.
When I use the proper white balance, the neg flip turns the image tinted blue.

When I use my inversion LUT with the proper white balance the image flips, and colors remain neutral.
- I would just use my inversion LUT, but my primary controls then become inverted.

I suspect something isn't right with the ordering of the negative flip and the White Balance. Do you think that could be the culprit/resolved?

David Newman October 15th, 2010 09:47 AM

Justin, your analysis is wrong. You are assuming that you can white balance then apply the negative flip and expect the white balance to still be correct, it will not be (or a fluke if it is). Using the inverting LUT is applied in curved space, where the balance it applied in linear space, this is part of what it throughing you off. Also the negative curve is applied before the white balance matrix, so of couse the red and blue will be transposed (as they should be.)

Justin Lovell October 15th, 2010 01:39 PM

Hey David!

Thank you for clarifying. I didn't realize that is how it worked.
Currently I am using Silicon DVR - and when I invert the image using an inversion look and grade that in DVR, everything is A-OK, but when I get into First Light, I am unable to continue my workflow because that look gets applied after the primaries, causing all my primary color correction controls to be inverted/backwards.

Then the current position of the negative invert is great, but then as you mentioned, it will change my WB.

Thoughts on a way around this? Possibility to apply a look before the Primaries may solve this.

Jeff Kosmicki October 15th, 2010 02:04 PM

There still no After Effects exporter?!!! CS5 has been out since Spring and I still can't render 10bit CineForm files, is this correct? If so, you may want to put that at the top of the list of things to do.
If I import an After Effects rendered CineForm file back into AE it is listed as Trillions of colors in the project window, but I assume it was rendered with 8-bit accuracy since I can only choose millions of colors in the exporter.

David Newman October 15th, 2010 03:05 PM

Be worked on now.

Rich Perry October 16th, 2010 07:44 AM

5.2 Issues with Matrox MX02 ?
 
I installed 5.2 but have major issues using a Matrox (MX02) Preset. anyone else notice this?

When opening CS5, no files will play back in timeline or in source monitor (hangs), was using build 5.1 (build 71 I think) prior to upgrading all was fine. I reverted to an old version after installing 5.2 but the problem still continued. I then restored (via Norton Ghost) my O/S drive and apps back to a good install with build 171 again and all is fine, tried the upgrade again and same issues when installing 5.2.

Also noticed a purple line on the HD monitor via MX02 that was not there before when trying 5.2.
I have no time to troubleshoot this so will revert back to an older build for now.
Any known issues?

David Newman October 16th, 2010 09:20 AM

That doesn't make much sense, we don't do everything custom for MX02 so it hard to imagine what could have changed. We will test the MX02 out next week.

Gary Brun October 16th, 2010 09:44 AM

I have always had problems with Cineform files with Matrox especially files with an alpha channel.
I don't believe this is a Cineform problem but a Matrox problem.

David Newman October 16th, 2010 09:48 AM

CineForm AVI and MOVs are implemented via an Premiere importer, so they is no direct interaction, Matrox should be loading CineForm images just as it would any other, and not be away on the source media type, abstracted by Premiere -- so this is all puzzling.

Rich Perry October 16th, 2010 10:53 AM

Thanks for the feedback chaps. Yes I agree, I don't think its Matrox as I have removed all Matrox drivers and I am having the same issue. I can't load cineform AVI's into the source monitor, it just displays white and kind of hangs... sometimes I can get audio playback but no video. If I use a cineform sequence I can put cineform AVI directly on the timeline and they play back in program monitor but not source... Something is definitely up and I don't really want to rebuild right now as I am on some tight deadlines, will probably stick at the old revision 5.1 unless there are any other suggestions.

David Newman October 16th, 2010 11:10 AM

Source monitor is work fine here with OpenGL off. We do have a bug with source monitor with OpenGL enabled in our play module. Matrox users shouldn't be using that.

Roger Averdahl October 16th, 2010 01:10 PM

Quote:

Originally Posted by Rich Perry (Post 1579299)
When opening CS5, no files will play back in timeline or in source monitor (hangs)

I see the same issues with no Matrox, in the Source and in the Program. (I dont have any Matrox hardware at all.)

To be able to playback and have no hangs with CF files:
I deleted this folder and its content: C:\Program Files\Adobe\Common\Plug-ins\CS5\MediaCore\CineForm
I then renamed "CFHD_AVI_Importer.prm" and "CFHD_AVI_Importer32.prm" to "CFHD_AVI_Importer.OLD" and "CFHD_AVI_Importer32.OLD" in the folder: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Plug-ins\Common\CineForm

I can playback files in AE without changing anything.

David Newman October 16th, 2010 01:20 PM

Sound like you need to file a trouble ticket with support. Your system might be missing required DLLs.


All times are GMT -6. The time now is 02:00 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network