|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
June 10th, 2009, 08:15 AM
|
#1 |
|
Tourist
Join Date: Jun 2009
Location: Troy, MI
Posts: 1
|
Embedded Audio Sync
I recently completed the the firmware update for the Flash XDR, and was eager to test out the SD record functions in the new firmware. However, when I completed my test shots(various shots around the office as well as me sitting in front of the camera making idle chatter) I found that the audio was WAY out of sync. A good 30 seconds out of sync if not more.
Interestingly, when I opted to try the Analog audio as a second test, the audio was in sync. (I used the audio outs on my camera, RCA, and went into the XLR inputs on the Flash XDR using a homemade cable) Setup: Flash XDR with most current update installed JVC GY 250 HD-SDI connection between the two BNC cable for connection(I tried three different cables all offering the same result) Flash XDR audio selection, Embedded Does anyone have any suggestions? I have gone through all the camera menus to try to see if I can isolate the problem to the camera but I can't find anything that jumped out to me as the cause of the problem. |
|
|
|
June 10th, 2009, 03:45 PM
|
#2 |
|
Regular Crew
Join Date: Nov 2007
Location: Colorado Springs, CO
Posts: 65
|
We're looking into it.
Have not seen it yet. Tommy Schell |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
