Red/Pink line ? at DVinfo.net
DV Info Net

Go Back   DV Info Net > The Tools of DV and HD Production > External Video Recording Solutions > Convergent Design Odyssey
Register FAQ Today's Posts Buyer's Guides

Convergent Design Odyssey
...and other Convergent Design products.

Reply
 
Thread Tools Search this Thread
Old August 9th, 2010, 08:05 PM   #1
Major Player
 
Join Date: Jan 2010
Location: Tokyo
Posts: 590
Red/Pink line ?

Hi there

Bit of an odd question but..

Shot a test HDX900 1080i/25p half-shutter Nano 50mbs MOV. lastest firmware..
A white lamp shade.. against white silk curtain,.. was giving me a red/pink line along the shade edge..against the white curtain..

Everything else fine..

Viewing on Mac book.. Not pro.. Quicktime..

Any idea,s ?

Thanks
Robin Probyn is offline   Reply With Quote
Old August 9th, 2010, 08:17 PM   #2
Trustee
 
Join Date: Sep 2006
Location: Montreal, Quebec, Canada
Posts: 1,138
Coloring of the Image ?

Hi Robin:
There are sooo many things which could be coloring the image you are seeing on your MAC laptop that it's sad. Do you own, or have access to an HD monitor ? Check playback on one of those first, then you will know for sure if something is amiss.
Mark Job is offline   Reply With Quote
Old August 9th, 2010, 09:51 PM   #3
Major Player
 
Join Date: Jan 2010
Location: Tokyo
Posts: 590
Hi Mark

Thanks for your time.. yes not so apparent on HD monitor.. Pana 900A .. see it much more on Mac book

Re shot just now .. same scene.. and seemed to have gone away.. the curtains have a very fine grain pattern in the material.. I think it depends on the folds.. some sort of optical thing I think.. ??

Thanks again
Robin Probyn is offline   Reply With Quote
Old August 10th, 2010, 01:33 AM   #4
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Robyn,

"Red/Pink" may be magenta, and it may be chromatic aberration.

Is there a slight green line on the other side of the shade?

Is the "Red/Pink" line towards the edge of the image as opposed to the center?

Which lens are you using?

If you have a good HD-SDI or HDMI monitor, is the "Red/Pink" line visible when playing back the footage directly from the nanoFlash?
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply With Quote
Old August 10th, 2010, 06:01 AM   #5
Major Player
 
Join Date: Jan 2010
Location: Tokyo
Posts: 590
Hi Dan

Yes I would say magenta.. other side of shade is against a green curtain ! so not sure about that.. :)

And yes the line is right on the edge of the shade..

Yes good glass.. HD Fujinon.. 4.5 wide angle zoom.. much less pronounced on Pana HD 900A on play back from Nano.. but still there a tiny bit..

Iam sure its to do with the very fine grain in the curtain material ..chromatic aberration.. what causes it to be magenta?

Thanks for your time.. again !
Robin Probyn is offline   Reply With Quote
Old August 10th, 2010, 07:25 AM   #6
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Robyn,

Technically it may not be chromatic aberration.

With certain cameras, under some contidtion, when going from one color to another, there is sometime a green line on the left and a magenta line on the right.

Are you recording at 50 Mbps or above, thus 4:2:2?
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply With Quote
Old August 10th, 2010, 07:37 AM   #7
Major Player
 
Join Date: Jan 2010
Location: Tokyo
Posts: 590
Hi Dan

Looks like lateral aberration .. from a quick look on the net.. edge against a very bright background.. actually magenta strip was on the left of the shade.. not an aperture settings or even a shot I think I would ever do on a real shoot.

Shooting 50Mbs Long GOP MOV.. had the lens a while and no complaints under many different circumstances .. but nearly all of that,99% has been shooting DVCpro HD.. not with the nano.. so in theory 100Mbs.. maybe just something to watch for with that lens?
Robin Probyn is offline   Reply With Quote
Old August 10th, 2010, 07:50 AM   #8
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Robyn,

If you can recreate the shot, please do so while recording to tape also.

When you run the tests, record some at both 50 Mbps and 100 Mbps Long-GOP.

I assume that you recorded the scene originally in 1080i50.

The DVCPro HD is far less resolution than the nanoFlash.

DVCPro HD reduces the resolution before compression, the nanoFlash does not.

nanoFlash
1280 x 720 for 720p
1920 x 1080 for 1080

DVCPro HD
960 x 720 pixels for 720p,
1280 x 1080 for 1080/59.94
1440 x 1080 for 1080/50i

(Specifications for DVCPro are from Wikipedia)

DVCPro HD may be 100 Mbps at certain frame rates, but drops down dramatically at other frame rates, such as 24p. The nanoFlash always gives you the requested bit-rate regardless of the frame rate.
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply With Quote
Old August 10th, 2010, 08:55 AM   #9
Major Player
 
Join Date: Jan 2010
Location: Tokyo
Posts: 590
Hi Dan

Ah ok interesting.. what Mbps does DVCpro go down to at 25p...? so would higher resolution give more chromatic lateral aberration ? or no effect?

Thanks again!
Robin Probyn is offline   Reply With Quote
Old August 10th, 2010, 09:13 AM   #10
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Roby,

Wikipedia sates that at 24 frames per second DVCPro goes down to 40 Mbps.
It does not state the bit rate at 25 frames per second.

We do not know if this is chromatic aberration or not.

A carefully controlled test, with your camera, your lens, running both tape and the nanoFlash at various bit rates would be very desirable.

Remember, the nanoFlash is just more faithfully recording the images from the camera.
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply With Quote
Old August 10th, 2010, 10:46 AM   #11
Major Player
 
Join Date: Jan 2010
Location: Tokyo
Posts: 590
Hi Dan

Interesting I didnt know that the 100mbps fell to 40 at 24p.. presumably 25p isnt much more..

So shooting at 25p with the nano at 50mbps is actually a higher bit rate than going to tape..???

Looks to be purple fringing.. thing.. cant think what else it is.. but yes could shoot some more tests.. as long as I have the curtains and the sun still shines :)

Thanks again
Robin Probyn is offline   Reply With Quote
Old August 10th, 2010, 11:13 AM   #12
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Robyn,

The difference is far greater than the 10 Mbps between 40 Mbps and 50 Mbps.

First, the nanoFlash records the full resolution provided to us.

Second, the nanoFlash, at 50 Mbps, is Long-GOP, and much more efficient than I-Frame Only at these bit-rates.

Good luck in your tests.

I highly recommend that, if you do the tests, example the images carefully on a good monitor, before or while you are recording. If you can see the fringing, the nanoFlash will record it.
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply With Quote
Old August 10th, 2010, 05:34 PM   #13
Major Player
 
Join Date: Aug 2009
Location: South Australia
Posts: 374
Hello Dan,
While you on the subject of Long Gop Vs I-Frame do you have a comparison chart that you could post for the various bit rates.

Many thanks
Lance Librandi is offline   Reply With Quote
Old August 10th, 2010, 06:14 PM   #14
Trustee
 
Join Date: Sep 2006
Location: Montreal, Quebec, Canada
Posts: 1,138
Oh Wow !

Quote:
Originally Posted by Dan Keaton View Post
Dear Robyn,
nanoFlash
1280 x 720 for 720p
1920 x 1080 for 1080

DVCPro HD
960 x 720 pixels for 720p,
1280 x 1080 for 1080/59.94
1440 x 1080 for 1080/50i

(Specifications for DVCPro are from Wikipedia)

DVCPro HD may be 100 Mbps at certain frame rates, but drops down dramatically at other frame rates, such as 24p. The nanoFlash always gives you the requested bit-rate regardless of the frame rate.
...Hey Dan: Oh crap ! I didn't know that ! I assume this is also an accurate statement covering the Flash XDR ? 1280 x 1080 = 1080/59.94i = SUCKS ! Less pixels at *any* data rate is still less pixels.
Mark Job is offline   Reply With Quote
Old August 10th, 2010, 07:56 PM   #15
Inner Circle
 
Join Date: Dec 2002
Location: Augusta Georgia
Posts: 5,421
Dear Mark,

Sorry, but I do not understand your comments.

The Flash XDR and nanoFlash always records full raster.

Full Raster for 720p = 1280 x 720 (1280 horizontal pixels, 720 vertical pixels).

Full Raster for 1080 = 1920 x 1080

The DVCPro HD is the codec that throws away resolution, then encodes the video stream.

The nanoFlash does not throw away any resolution.
__________________
Dan Keaton
Augusta Georgia
Dan Keaton is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

B&H Photo Video
(866) 521-7381
New York, NY USA

Scan Computers Int. Ltd.
+44 0871-472-4747
Bolton, Lancashire UK


DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > The Tools of DV and HD Production > External Video Recording Solutions > Convergent Design Odyssey


 



All times are GMT -6. The time now is 06:06 AM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network