DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Convergent Design Odyssey (https://www.dvinfo.net/forum/convergent-design-odyssey/)
-   -   Panasonic TM900 (https://www.dvinfo.net/forum/convergent-design-odyssey/492264-panasonic-tm900.html)

Ronald Jackson February 25th, 2011 08:41 AM
Panasonic TM900
 
Will this cam work with a nanoFlash? It has HDMI out so?

Ron

Dan Keaton February 28th, 2011 09:29 AM
Re: Panasonic TM900
 
Dear Ronald,

In 2D mode, yes the TM900 should work with the nanoFlash.

Alastair Traill March 3rd, 2011 03:35 PM
Re: Panasonic TM900
 
In order to connect a TM900 to a nanoFlash a mini HDMI to miniHDMI cable is required. Is there a source for such a cable? Alternatively is there a connector to connect two miniHDMI / HDMI cables together?

Alastair Traill March 4th, 2011 01:34 AM
Re: Panasonic TM900
 
I have found an adapter that converts HDMI to mini HDMI, they seem to readily available for around $10.
I can now use the cable that came with the nF - that problem is solved.

Ronald Jackson March 4th, 2011 02:57 AM
Re: Panasonic TM900
 
Subsidiary questions. If I wish to intercut footage from the TM900/nanoFlash with footage from my XLH1/nanoFlash then presumably I need to set the TM900 to output 25p?

However, if I wish to intercut the TM900 footage, without attaching the nanoFlash, which is still attached to XLH1, could I intercut 50p footage? I edit, sort of, in FCP.


Ron


All times are GMT -6. The time now is 01:06 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network