DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Convergent Design Odyssey (https://www.dvinfo.net/forum/convergent-design-odyssey/)
-   -   Internal Timecode changing on nano (https://www.dvinfo.net/forum/convergent-design-odyssey/504608-internal-timecode-changing-nano.html)

Jack Zhang January 20th, 2012 10:03 PM

Internal Timecode changing on nano
 
New to the nanoFlash scene, and just got around to manually setting my timecode internally.

In it's current state, internal timecode setting requires you to move up and down groups of digits, not each digit one by one.

Can this be changed to individual digits in a future firmware upgrade?

Dan Keaton January 21st, 2012 07:11 AM

Re: Internal Timecode changing on nano
 
Dear Jack,

I will present your request to our engineers.

Please note that you can hold down the up or down buttons and it will start advancing quickly through the numbers after a short delay.

Jack Zhang January 21st, 2012 03:52 PM

Re: Internal Timecode changing on nano
 
I realize that, still, individual digits could speed timecode setting up when you're forced to use internal timecode generators.

Robin Probyn January 21st, 2012 07:40 PM

Re: Internal Timecode changing on nano
 
I shoot rec run internal TC and its much easier than with tapes.. I set it to start at 01hrs and then leave it all day (s) long .. much easier than changing TC for each tape.. change per job only :)


All times are GMT -6. The time now is 07:05 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network