|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
May 16th, 2012, 08:10 PM
|
#1 |
|
Regular Crew
Join Date: Mar 2011
Location: Toronto, Canada
Posts: 26
|
SD SDI in SD HDMI out
Hi there,
We have an application where we need to send an SD SDI signal into the Nanoflash and have a passthrough signal over the HDMI out. When the input is set to HD, the output is able to be viewed fine on an external HDMI monitor. Howver when the signal is switched to SD, though the Nanoflash recognizes it is SD and is even able to record it, it is unable to send the signal through the HDMI out. Any ideas? Martin |
|
|
|
May 16th, 2012, 08:37 PM
|
#2 |
|
Inner Circle
Join Date: May 2005
Location: Burnaby, BC, Canada
Posts: 3,053
|
Re: SD SDI in SD HDMI out
It clearly states in the documentation that SD HDMI is currently not supported. Page 38 of the manual. (for which I've put a link to below)
http://www.matrixvideo.ca/pdf_folder...ash_Manual.pdf |
|
|
|
|
May 17th, 2012, 06:43 PM
|
#3 |
|
Regular Crew
Join Date: Mar 2011
Location: Toronto, Canada
Posts: 26
|
Re: SD SDI in SD HDMI out
Great, thanks for pointing that out. Usage of the Nanoflash up to now has been pretty trouble free so there was no need for the user manual up to now...
|
|
|
|
|
May 17th, 2012, 06:46 PM
|
#4 |
|
Inner Circle
Join Date: May 2005
Location: Burnaby, BC, Canada
Posts: 3,053
|
Re: SD SDI in SD HDMI out
Also, the latest firmware does not support SD HDMI recording neither. No word on when that will be fixed as that was a feature not often requested.
|
|
|
|
|
| ||||||
|
||||||
|
|
