DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Convergent Design Odyssey (https://www.dvinfo.net/forum/convergent-design-odyssey/)
-   -   Power Connector Pinout (https://www.dvinfo.net/forum/convergent-design-odyssey/521749-power-connector-pinout.html)

Brian T. Young February 18th, 2014 05:29 PM

Power Connector Pinout
 
Greetings,

When looking at the 7Q power connector CABLE, pin 1 is on the bottom, pin 2 upper left and pin 3 is upper right.

Which pin is hot (+) and which is ground (-)??

Thanks!
Brian

Brian T. Young February 19th, 2014 02:05 AM

Re: Power Connector Pinout
 
Got it - when holding the power cable and looking into the female pins - HOT (+) is upper left (#2) GROUND (-) is upper right (#3)

Olof Ekbergh February 19th, 2014 07:49 AM

Re: Power Connector Pinout
 
2 Attachment(s)
To be clear:

Looking at the connector on the wire that plugs into the O7Q.

It is a Neutrik Nano nsc3f.
NSC3F - Neutrik

Upper left is +.
Upper right is -
Bottom is -
The case is not connected to ground. That it it is not connected to negative or -.

Brian T. Young February 19th, 2014 12:19 PM

Re: Power Connector Pinout
 
excellent - thanks.

Dan Keaton February 19th, 2014 12:53 PM

Re: Power Connector Pinout
 
Dear Brian,

Olof answered your question before our production team was able to get back with me.

Dear Olof,

Thank you for answering Brian's question.

Respectfully,


All times are GMT -6. The time now is 10:03 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network