retrieving files during record FS-2 at DVinfo.net

Rens van der Zwan · August 30th, 2004, 04:24 AM

If the Fs-2 being used for continious recording 24 hrs a day, are the recorded files available true the network connection.

Anyone ever used this kind of workflow or tested it.

Matt McEwen · September 2nd, 2004, 08:52 AM

Hi Rens,

Sorry for the late reply.

You could use FS-2 for long recordings (such as a 24-hour recording). It comes with a 120GB internal drive (which is just under 10 hours of recording), but you can also daisy chain up to four standard FieWire drives from the unit. When one drive fills, it will begin recording to the next drive.

It is possible to access the clips on the connected disk drives from a network via the Ethernet port using FTP.

Hope that helps.

Matt McEwen

August 30th, 2004, 04:24 AM	#1
Rens van der Zwan Tourist Join Date: Aug 2004 Location: Utrecht , Netherlands Posts: 1	retrieving files during record FS-2 If the Fs-2 being used for continious recording 24 hrs a day, are the recorded files available true the network connection. Anyone ever used this kind of workflow or tested it.

September 2nd, 2004, 08:52 AM	#2
Matt McEwen Focus Enhancements Join Date: Oct 2003 Location: Campbell, CA. Posts: 508	Hi Rens, Sorry for the late reply. You could use FS-2 for long recordings (such as a 24-hour recording). It comes with a 120GB internal drive (which is just under 10 hours of recording), but you can also daisy chain up to four standard FieWire drives from the unit. When one drive fills, it will begin recording to the next drive. It is possible to access the clips on the connected disk drives from a network via the Ethernet port using FTP. Hope that helps. Matt McEwen