DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   High Definition Video Editing Solutions (https://www.dvinfo.net/forum/high-definition-video-editing-solutions/)
-   -   Component out and Firewire machine control (https://www.dvinfo.net/forum/high-definition-video-editing-solutions/36196-component-out-firewire-machine-control.html)

Dustin Cross December 10th, 2004 12:35 PM

Component out and Firewire machine control
 
Aloha,

I think I have figured out one of the better ways to capture footage from the FX1.

Set firewire output to DV25.

Connect component output to an I/O card with component in. I am looking at a Decklink HD ($600) and a Decklink Multibridge ($2000). There are other options both HD and SD.

Next I set FCP to do machine control via Firewire and capture via the Decklink.

Now I can set in and out points, control the camera from FCP, and get timecode embedded.

Unless there is some way to get TC in an HDV file over firewire, I think this is the best set-up.

I haven't tried it yet, I am just now buying my HD card, but a guy on another forum was doing this with an SD I/O card and his FX1. Once I looked at the settings in FCP it seemed obvious.

My only concern is what codec to capture to? I don't have fast enough drives for uncompressed HD. I guess I can capture to DVCProHD 1080i until I can afford faster drives.


All times are GMT -6. The time now is 08:26 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network