|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
August 29th, 2008, 03:30 AM
|
#1 |
|
New Boot
Join Date: Jul 2008
Location: Athens, Greece
Posts: 19
|
Worried about hardware upgrade on JVC GY-HD101E
Hi everyone,
I recently contacted JVC Greece about upgrading a 101E camera to the latest hardware/firmware. The JVC service said they have to attach a wire from a silicon board to another, and add an extra resistor, in addition to the firmware upgrade. I just wanted to know if anyone has had any experience, and if this procedure is normal, since it has me worried a bit. In the end all I want to do is to be able to capture uninterrupted clips from FCP :) |
|
|
|
August 29th, 2008, 07:54 AM
|
#2 |
|
Wrangler
Join Date: Aug 2005
Location: Toronto, ON, Canada
Posts: 3,637
|
That's normal.
This is why the (A) upgrades could not be done by the end user. Once you have this done future firmware updates can be downloaded and applied without JVC's assistance.
__________________
Tim Dashwood |
|
|
|
|
August 30th, 2008, 04:58 AM
|
#3 |
|
Major Player
Join Date: Nov 2005
Location: Belgium
Posts: 695
|
Nick, It's a small modification.
After a day I could pick-up my camera again. It solved all the issues I had on the HD100 that time.
__________________
Marc Colemont - Belgium - http://www.mc-productions.be JVC GY-HM850's, HM890, HM600 |
|
|
|
|
| ||||||
|
||||||
|
|
