|
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
January 29th, 2009, 03:22 PM
|
#1 |
|
Major Player
Join Date: Apr 2006
Location: Pacific NW
Posts: 431
|
flip out LCD loose
anyone experience the flip out LCD on the camera suddenly
much easier to move and kinda loose on the hinge? I just got my cam back from an associate using it and now the LCD is pretty loose. It was always very firm before. anyone know how to fix this? |
|
|
|
February 1st, 2009, 01:20 PM
|
#2 | |
|
Regular Crew
Join Date: Aug 2006
Location: Paris France
Posts: 89
|
Quote:
I had the same experience once with a Canon XM1 fold out screen and was able to successfully tighten it up. With that Canon camera it was a matter of getting inside the flip-out monitor casing. Then at the camera end there were bolts/ screws that could be adjusted. BE WARNED, THIS MAY NOT BE THE CASE WITH your JVC! However, if you feel like having a very careful look, You would need an X headed jewellers screwdriver. There are two monitor casing X headed screws on the leading edge of the JVC GY-HD 201E flip-out screen, and two more on the hinge end. They are PROBABLY how you remove the screen casing and the solution MAY be reviled. |
|
|
|
|
|
February 1st, 2009, 06:04 PM
|
#3 |
|
Trustee
Join Date: Apr 2006
Location: United States
Posts: 1,158
|
replace the hinge assembly
probably was dropped or smacked |
|
|
|
|
February 2nd, 2009, 11:24 AM
|
#4 |
|
Major Player
Join Date: Apr 2006
Location: Pacific NW
Posts: 431
|
I have just heard he lost gripping of it about 2 feet off the ground
and it hit. do you know the replacement cost from JVC? |
|
|
|
|
| ||||||
|
||||||
| Thread Tools | Search this Thread |
|
|
