This problem sterted after the "A" upgrade
 

I already posted this problem a month ago here on this forum.

http://www.dvinfo.net/conf/showthread.php?t=75337

Before the "A" upgrade I never had it. Now with the "A" upgrade this problem just started.
What can I do Carl?

Thanks Laszlo

I have the same, camera started going to "Changing mode" after I got it back from the "A" upgrade. Something happened to a bunch of upgrades. At this point I rather have it as it was before. Carl, any possibility to have this fixed soon?

TIA

Laslow, the upgrade has many elements to it. It's possible that part of the upgrade did not take properly. I have heard of this happing once in the U.S. One of the posters on the other thread you referred to also said something similar. Have you contacted the tech support people in Canada? It will probably need to go into service to check the updates. That's your course of action.

I do not have the Canada support info. Perhaps Tim can help with that info.

Regards, Carl

Paolo,

Just send it back to service in Cypress, with a note explaining the symptom.

Regards, Carl

Thank you Carl.

Thanks Carl - I'll investigate further - do you know of any team in Germany carrying out these upgrades - the shop specifically mentioned the 'software' was upgraded in Germany on this batch of HD100's...
I haven't had a problem with the cam as yet, although a series of quick stop and starts via capturing on QTime caused a tape stuck error - just turned the JVC on and off and the error was eliminated.

Thanks Carl.

I bought the cameras in the States from Armato's, so look like I need to send back to Cypress.
The only problem is I can't send back till mid November, when my season will end. That's will be OK?

Please let me know.

BTW: My name is Laszlo. But it's not the biggie.... Once you get it may you never forget it. It's hungarian.

Thanks Carl.

I have seen the 'bag' with components for my upgrade. It was a short wire and a new resistor they had to replace on the processor circuitboard.

To save yourself the upgrade charge, just get it in before the warranty runs out.