DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   JVC GY-HD Series Camera Systems (https://www.dvinfo.net/forum/jvc-gy-hd-series-camera-systems/)
-   -   HD100 Firmware Update available (https://www.dvinfo.net/forum/jvc-gy-hd-series-camera-systems/99098-hd100-firmware-update-available.html)

Steve Oakley July 16th, 2007 10:10 PM

HD100 Firmware Update available
 
the firmware update that the 200 series got is now available for the 100 series. Please Please Please read the directions first because there are 6 versions of the firmware - you must install the correct version for you camera.

http://pro.jvc.com/pro/attributes/HD...00110_upgrade/

have fun, be careful !

Steve Oakley

Eric Darling July 16th, 2007 11:24 PM

Yes, at least one user in another thread reports difficulties with the firmware flash on their camera. Not sure what led to his issues, but I'm going to hold off until I need to update. Since it only addresses the FCP issues with digitizing HDV, it's not a problem for my current workflow.

Amir Terkel July 17th, 2007 01:19 AM

HD100 Firmware Update available
 
I updated the firmware successfully
however am sad to report this did not alleviate any of my FCP capture woes.
Clip segmenting and Cut off at the beginning and end.

Would love to hear if this has solved the problems for other FCP users, and if so what settings you are using.

Steven Thomas July 17th, 2007 05:57 AM

Please direct me to a spec sheet that entails what the upgrade offers?

Eirikur Ingi Bodvarsson July 17th, 2007 06:08 AM

Quote:

Originally Posted by Steve Oakley (Post 713062)
the firmware update that the 200 series got is now available for the 100 series. Please Please Please read the directions first because there are 6 versions of the firmware - you must install the correct version for you camera.

http://pro.jvc.com/pro/attributes/HD...00110_upgrade/

have fun, be careful !

Steve Oakley

Can I use this firmware update on my HD-111E or is it just for the US versions of the Camera

Joseph A. Benoit July 17th, 2007 06:54 AM

Hello
I have a 110
are these firmware updates for FCP USERS ISSUES.
I use vegas and so far no problems
thank you
Joe

Bill Ravens July 17th, 2007 09:28 AM

This is very strange because when I enter my firmware key, CVDGJDJJ, I receive a message informing me that my version number is incorrect or missing. The directions provided are ambiguous. Considering the potential for damage, how excusable is this?

Eirikur Ingi Bodvarsson July 17th, 2007 11:10 AM

Quote:

Originally Posted by Bill Ravens (Post 713262)
This is very strange because when I enter my firmware key, CVDGJDJJ, I receive a message informing me that my version number is uncorrect or missing. The directions provided are ambiguous. Considering the potential for damage, how excusable is this?

Yes I got the same thing! Some error going on there.

Steven Thomas July 17th, 2007 12:11 PM

I'm not positive if this is the reason, but the download page mentions the upgrade is for US purchased GY-HD 110U/100U models.

"This upgrade is for owners of JVC's 100 Series ProHD Camcorders purchased in the United States."

http://pro.jvc.com/pro/attributes/HD...00110_upgrade/

Jon Jaschob July 17th, 2007 12:25 PM

So what happened to the low light update?
I realize there are a lot of FCP users, but this update seems pretty useless for the camera owners???!!!! I use PPRo2 and Cineform so.....
Ok, thanks for letting me get that off my chest.
Cheers,
Jon

Steven Thomas July 17th, 2007 12:34 PM

Quote:

Originally Posted by Jon Jaschob (Post 713349)
So what happened to the low light update?
Jon

Jon,
Do you know what the upgrade offers? I found nothing on this.
Anyone....

Jon Jaschob July 17th, 2007 01:35 PM

All I could find...
http://www.usjvc.com/faq/

What I want!
http://www.digitalcamcordernews.com/...ced-with-lolux

David Parks July 17th, 2007 01:37 PM

Looks like it is for FCP dig clip issues only. I think I'll wait for more info.

Joseph A. Benoit July 17th, 2007 06:26 PM

Hi
check out the website that Jon said to goto and it explains that the
upgrade is for FCP clip issues

Joe

Scott Jaco July 17th, 2007 06:38 PM

Quote:

Originally Posted by Amir Terkel (Post 713118)
I updated the firmware successfully
however am sad to report this did not alleviate any of my FCP capture woes.
Clip segmenting and Cut off at the beginning and end.

Did you adjust your pre & post roll to 1 second? Usually this only creates a 2-3 second gap between clips.

I don't think the upgrade addresses that. It's to help prevent longer clips from being segmented during capture.

I may be wrong so anyone at JVC can chime in at any point!


All times are GMT -6. The time now is 11:06 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network