Exporting Final Cut 7 clips to HM 700 for playback at DVinfo.net

Timothy Stollery · April 21st, 2013, 12:05 PM

Hello,
Hope someone can help.
I am using an HM 700 with FCP 7. I would like to be able to drag my finished news story back to the SD card, and then playback thru the camera to LiveU via SDI.
This worked with my GY -200 as "print to video."

However, with the HM 700, when I put clips on the SD card, the Camera does not recognize them.
Camera only sees the clips that it shot.

Is there an export setting out of FCP that will do the trick?
Thanks.
Tim

April 21st, 2013, 12:05 PM	#1
Timothy Stollery New Boot Join Date: Feb 2013 Location: Hillsborough, NJ Posts: 8	Exporting Final Cut 7 clips to HM 700 for playback Hello, Hope someone can help. I am using an HM 700 with FCP 7. I would like to be able to drag my finished news story back to the SD card, and then playback thru the camera to LiveU via SDI. This worked with my GY -200 as "print to video." However, with the HM 700, when I put clips on the SD card, the Camera does not recognize them. Camera only sees the clips that it shot. Is there an export setting out of FCP that will do the trick? Thanks. Tim

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search