Help! HDD wont appear! at DVinfo.net

Ong Wan Shu · December 31st, 2003, 07:35 AM

hi all,

this is my current set up.

pentium 4 1.8ghz
Maxtor 60G HDD
Ram 1.5G
Mother board has 4 IDEs. 1st IDE is the 60G HDD and 2nd IDE is the CD-ROM. the 3rd and fourth are "optional" raid IDES. Manual says they can be set as normal IDEs or set as RAID.

Now i bought a new 120G Maxtor HDD and connect to the 3rd IDE . I set the IDE as NORMAL (NON-RAID) in the setup utility.

When I run my Win XP PRO, the 120G HDD did not appear as a HDD in "My computer". However, when I try to "add a hardware" in control panels, it says this HDD is working fine!!! What did i do wrong? How do i tell the computer I want the 120G HDD to be a storage HDD on its own??

PLEASE HELP!!!

Ed Smith · December 31st, 2003, 08:32 AM

Ong,

You need to go to computer mangement/ disk manager and import the drive. This is normally done by:

Right clicking on my computer, choosing manage. Then click on disk manager. Hopefully you should be able to "see" the disk here. You then need to right click on the disk and I think its called import disk or something similar.

You should then be able to read and write to the disk as normal.

Hope this helps,

Ed

Allan Phan · December 31st, 2003, 01:47 PM

Try to change the jumper to "cable select"

Ong Wan Shu · December 31st, 2003, 11:32 PM

Thanks Ed!!! You saved my ass!!!

Ed Smith · January 1st, 2004, 08:33 AM

Not a problem, Good to see all is now working. :-)

Ed

December 31st, 2003, 07:35 AM	#1
Ong Wan Shu Regular Crew Join Date: Mar 2003 Posts: 74	Help! HDD wont appear! hi all, this is my current set up. pentium 4 1.8ghz Maxtor 60G HDD Ram 1.5G Mother board has 4 IDEs. 1st IDE is the 60G HDD and 2nd IDE is the CD-ROM. the 3rd and fourth are "optional" raid IDES. Manual says they can be set as normal IDEs or set as RAID. Now i bought a new 120G Maxtor HDD and connect to the 3rd IDE . I set the IDE as NORMAL (NON-RAID) in the setup utility. When I run my Win XP PRO, the 120G HDD did not appear as a HDD in "My computer". However, when I try to "add a hardware" in control panels, it says this HDD is working fine!!! What did i do wrong? How do i tell the computer I want the 120G HDD to be a storage HDD on its own?? PLEASE HELP!!!

December 31st, 2003, 08:32 AM	#2
Ed Smith Wrangler Join Date: Jan 2002 Location: Hampshire, England Posts: 1,545	Ong, You need to go to computer mangement/ disk manager and import the drive. This is normally done by: Right clicking on my computer, choosing manage. Then click on disk manager. Hopefully you should be able to "see" the disk here. You then need to right click on the disk and I think its called import disk or something similar. You should then be able to read and write to the disk as normal. Hope this helps, Ed __________________ Ed Smith Hampshire, UK Good things come to those who wait My Skiing web www.Frostytour.co.uk For quick answers Search dvinfo.net \| The best in the business: dvinfo.net Sponsors

January 1st, 2004, 08:33 AM	#5
Ed Smith Wrangler Join Date: Jan 2002 Location: Hampshire, England Posts: 1,545	Not a problem, Good to see all is now working. :-) Ed __________________ Ed Smith Hampshire, UK Good things come to those who wait My Skiing web www.Frostytour.co.uk For quick answers Search dvinfo.net \| The best in the business: dvinfo.net Sponsors

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

December 31st, 2003, 01:47 PM	#3
Allan Phan Regular Crew Join Date: Dec 2003 Location: Alexandria, VA Posts: 95	Try to change the jumper to "cable select"

December 31st, 2003, 11:32 PM	#4
Ong Wan Shu Regular Crew Join Date: Mar 2003 Posts: 74	Thanks Ed!!! You saved my ass!!!