DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Panasonic DVX / DVC Assistant (https://www.dvinfo.net/forum/panasonic-dvx-dvc-assistant/)
-   -   DVX200- No Exposure Meter at all and no WFM while recording? (https://www.dvinfo.net/forum/panasonic-dvx-dvc-assistant/530429-dvx200-no-exposure-meter-all-no-wfm-while-recording.html)

Matthew C. Abourezk November 23rd, 2015 07:35 AM

DVX200- No Exposure Meter at all and no WFM while recording?
 
Ouch...

Someone please tell me I am missing something...

Seems to me that a Run-n-Gun camera should have an exposure meter and/or be able to use the waveform monitor while shooting...

Also seems to me that the Zebra is kludgy.... the Zebra on my PX 270 is apparent at all times when there is an overexposure... the 200 zebra seems to come and go.

Any thoughts?
Matt

Roger Gunkel November 23rd, 2015 10:27 AM

Re: DVX200- No Exposure Meter at all and no WFM while recording?
 
My Panny FZ1000s have a variable setting for the Zebras so that it can be set for 100% or less depending on whether you want to know whether it is over exposing or getting close. I would think that you can adjust the sensitivity of the Zebras on the much higher spec DVX200 and it is probably set at the over exposed end so is only showing intermittently. The exposure meter on the FZ1000 can be on or off depending on display settings and camera mode, so should be a similar thing with yours. I can't imagine there is no meter at all.

Roger

Vaughan Wood November 24th, 2015 04:34 PM

Re: DVX200- No Exposure Meter at all and no WFM while recording?
 
The WFM can be used when filming, you just lose the other info off the screen when it's turned on.

You also forgot to mention that it also has a histogram, not that I ever use it, but it's listed there.

Cheers,

Vaughan

Barry Green November 25th, 2015 04:33 PM

Re: DVX200- No Exposure Meter at all and no WFM while recording?
 
Quote:

Originally Posted by Matthew C. Abourezk (Post 1903561)
Seems to me that a Run-n-Gun camera should have an exposure meter and/or be able to use the waveform monitor while shooting...

There is no exposure meter (i.e., +/- 1 stop, etc) but there is a histogram. And, as Vaughn said, the waveform is usable while recording too.

Quote:

Also seems to me that the Zebra is kludgy.... the Zebra on my PX 270 is apparent at all times when there is an overexposure... the 200 zebra seems to come and go.
There's nothing "kludgy" about it, you just have the zebras set to "temporary" instead of "permanent". There's a menu item you can set that will tell the zebras to display all the time, or to disappear after five seconds. The factory default is, IIRC, for them to be temporary.


All times are GMT -6. The time now is 03:59 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network