DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Panasonic DVX / DVC Assistant (https://www.dvinfo.net/forum/panasonic-dvx-dvc-assistant/)
-   -   B&W on dvx100 (https://www.dvinfo.net/forum/panasonic-dvx-dvc-assistant/58431-b-w-dvx100.html)

Kris Galuska January 16th, 2006 05:02 PM

B&W on dvx100
 
Does anyone have any links to B&W footage shot on DVX100?

I'm shooting a Film Noir with the camera. I would like to see what others have achieved

Saturnin Kondratiew January 16th, 2006 05:44 PM

shoot color and in post flatten it in CC....i'm sure thats the advice everyone will tell you.

have fun

Kris Galuska January 17th, 2006 06:52 PM

That is the best method, especially since I will leave some color in.

I was just looking for examples others have done. I want to see how far they push the camera.

Anyone have any clips?

Jon Fordham January 18th, 2006 05:35 PM

Kris,

I have shot a number of black and white projects on the DVX. Unfortunately, none of them are available on the web. But here is my advice...

First of all, I 100% disagree that shooting color and pulling it out in post is the best method. However, the DVX doesn't allow you to pull the color completely out in the camera. So you're stuck working that way.

Second, if you are working with the updated DVX A or B models, go into the menu and select 6. DISPLAY SETUP, then scroll all the way down to page 3 and select EVF COLOR OFF. This will switch the viewfinder to black and white. It will not effect the LCD. This way you can have a color image on the LCD and a quick reference black and white image in the viewfinder.

I have found that I get superior black and white results by setting up the SCENE FILE menu as follows:

DETAIL LEVEL -4
V DTEIAL LEVEL -2
DETAIL CORING +2
CHROMA LEVEL -7
CHROMA PAHSE 0
COLOR TEMP 0
MASTER PED -12
A. IRIS LEVEL 0
GAMMA LOW
KNEE LOW
MATRIX NORM
SKIN TONE DTL OFF
V DETAIL FREQ THIN
PROGRESSIVE 24P

Lastly, I recommend over exposing the image by at least 1/2 a stop. Often times, over exposing a full stop will yield even better results. Basically the above settings will crush your blacks and pull the color down. By over exposing, you push the highlights to pure white. Since the color will be pulled out of the image resulting in black and white, don't sweat the highlights blowing out. In fact, purposely let those skin tones over expose.

This approach will result in a very clean, nicely contrasted, pure black and white image.

Of course, what will really sell the look is proper Film Noir lighting...


All times are GMT -6. The time now is 12:46 PM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network