DV Info Net

DV Info Net (https://www.dvinfo.net/forum/)
-   Panasonic DVX / DVC Assistant (https://www.dvinfo.net/forum/panasonic-dvx-dvc-assistant/)
-   -   How to remove blue lines in DVX100 + Anamorphic Lens ? (https://www.dvinfo.net/forum/panasonic-dvx-dvc-assistant/9495-how-remove-blue-lines-dvx100-anamorphic-lens.html)

John Goul May 10th, 2003 09:24 AM

How to remove blue lines in DVX100 + Anamorphic Lens ?
 
I am always having blue vertical line at the left of the picture when I shoot with the 16:9 lens. I think it doesn't fit exactly that's why. It leaves a gap front the front focus wheel which is not same up and down (up is wide - down is narrow). I tried the included mounting instructions but I can't make a perfect fit!
Can anyboby help?

John
DVX100E PAL
Greece

Jeff Donald May 10th, 2003 02:29 PM

I've had similar problems with various adapters I've used over the years. Usually a piece of gaffers tape around the mount seals out stray light from the loose fit. If the streak is caused by misalignment, I epoxy the adapter to a mounting ring.

I check the image with the camera plugged into a monitor. I move the adapter until the line disappears and mark the position. Then I attach the adapter and epoxy the adapter following my marks.

If all the taping and/or gluing have you put off, try returning the adapter or exchanging it.


All times are GMT -6. The time now is 07:56 AM.

DV Info Net -- Real Names, Real People, Real Info!
1998-2024 The Digital Video Information Network