Gh5 firmware 2,0 - Page 8 at DVinfo.net

Go Back   DV Info Net > Panasonic P2HD / AVCCAM / AVCHD / DV Camera Systems > Panasonic LUMIX G / GF / GH / GX Series

Panasonic LUMIX G / GF / GH / GX Series
4K and AVCHD on a Micro Four Thirds system camera with interchangeable lenses.


Reply
 
Thread Tools Search this Thread
Old October 6th, 2017, 10:33 AM   #106
Trustee
 
Join Date: Jan 2013
Location: Austin, Texas
Posts: 1,717
Re: Gh5 firmware 2,0

Here's a clip for you, the first is UHD 8-bit 4:2:0 Slog2/Sgamut from back when I owned the A7R Mark II.

https://drive.google.com/open?id=0Bx...0FGLThFMkY0NTg

The second clip, downscaled with the highest quality scaler out of DaVinci Resolve Studio 14 into 1080 ProRes 12-bit 444.

https://drive.google.com/open?id=0Bx...jcxcVVCWFFpRTg

Now what difference can you illustrate between these two? Or is this workflow not correct? If it's not correct, what should I have done differently?
Gary Huff is offline   Reply With Quote
Old October 6th, 2017, 10:33 AM   #107
Trustee
 
Join Date: Aug 2010
Location: Florida
Posts: 1,098
Re: Gh5 firmware 2,0

So I'm guessing you are not impressed by the detail...even on your 4k monitor?

I would recommend that you delete that Safari/Chrome 4k player mistake. You don't want people around here to think you don't know what you are doing and that's bad for your rep

Just lookin' out for you, Gary ;-)
Cliff Totten is offline   Reply With Quote
Old October 6th, 2017, 10:38 AM   #108
Trustee
 
Join Date: Jan 2013
Location: Austin, Texas
Posts: 1,717
Re: Gh5 firmware 2,0

Quote:
Originally Posted by Cliff Totten View Post
I would recommend that you delete that Safari/Chrome 4k player mistake. You don't want people around here to think you don't know what you are doing and that's bad for your rep
That doesn't worry me in the slightest. Everyone makes mistakes. I own up to them.
Gary Huff is offline   Reply With Quote
Old October 17th, 2017, 12:49 PM   #109
Regular Crew
 
Join Date: Feb 2012
Location: England
Posts: 49
Re: Gh5 firmware 2,0

Just got a Delkin v60 64gb card.

Shooting 400mb Intra frame, 10Bit, 24p.

First 2 test clips I recorded for 1m30 each. All fine.

Then subsequent 3 clips all stopped recording around 25 seconds.

I noticed that those last 3 clips were recorded when the battery had dropped down to 1 bar.
Also that playback on the camera (at 1 bar battery) resulted in a drop of sound every second. Playback on PC has no issues with sound.

Will do further tests when I've got a full battery.

Edit - Tests on a full battery ran perfectly. 8 minute clip without problems.

Last edited by Shaun Forsdyke; October 18th, 2017 at 04:44 AM.
Shaun Forsdyke is offline   Reply With Quote
Old October 18th, 2017, 08:24 PM   #110
Trustee
 
Join Date: Jan 2013
Location: Austin, Texas
Posts: 1,717
Re: Gh5 firmware 2,0

Are you using Panasonic OEM batteries for these tests? I'm interested in the results because I'm looking at Delkin 256GB V60 cards to use for Intra, but it seems odd that a low battery would cause issues (though not impossible).
Gary Huff is offline   Reply With Quote
Old October 19th, 2017, 04:19 PM   #111
Regular Crew
 
Join Date: Feb 2012
Location: England
Posts: 49
Re: Gh5 firmware 2,0

Was using the official battery that came with the camera.
Shaun Forsdyke is offline   Reply With Quote
Old October 23rd, 2017, 05:07 PM   #112
Regular Crew
 
Join Date: Feb 2012
Location: England
Posts: 49
Re: Gh5 firmware 2,0

A review on Amazon says slot 1 is uhs 2 and slot 2 is V90.

Any truth in that?

Edit: playback in slot 2 eliminates jumping so certainly appears to be reading faster.

Last edited by Shaun Forsdyke; October 23rd, 2017 at 06:04 PM.
Shaun Forsdyke is offline   Reply With Quote
Old October 23rd, 2017, 07:40 PM   #113
Inner Circle
 
Join Date: Mar 2003
Location: Ottawa, Ontario, Canada
Posts: 3,977
Re: Gh5 firmware 2,0

Quote:
Originally Posted by Shaun Forsdyke View Post
A review on Amazon says slot 1 is uhs 2 and slot 2 is V90.

Any truth in that?

Edit: playback in slot 2 eliminates jumping so certainly appears to be reading faster.
I believe they are both the same. The important thing is the card speed both are UHS 2. V60 is on the limit I think as that means a minimum of 60MBps second write speed or 480 Mbs. I think you may find that a V90 card will be more consistent as any variation does not give you a lot of margin.V90 would be 720Mbps write minimum. Which I think Panasonic states as the preferred card.
Ron Evans is offline   Reply
Reply

DV Info Net refers all where-to-buy and where-to-rent questions exclusively to these trusted full line dealers and rental houses...

Texas Media Systems
(512) 440-1400
Austin, TX

B&H Photo Video
(866) 521-7381
New York, NY

Z.G.C.
(973) 335-4460
Mountain Lakes, NJ

Abel Cine Tech
(888) 700-4416
N.Y. NY & L.A. CA

Precision Camera
(800) 677-1023
Austin, TX

DV Info Net also encourages you to support local businesses and buy from an authorized dealer in your neighborhood.
  You are here: DV Info Net > Panasonic P2HD / AVCCAM / AVCHD / DV Camera Systems > Panasonic LUMIX G / GF / GH / GX Series

Thread Tools Search this Thread
Search this Thread:

Advanced Search

 



Google
 

All times are GMT -6. The time now is 06:22 PM.


DV Info Net -- Real Names, Real People, Real Info!
1998-2017 The Digital Video Information Network